I took a look in the sticky at the front brake/bearing service article.

Unlike the Chevy style of adjusting/locking nuts, that are pictured, the son's truck has 2-9/16 HEX nuts, with the fold-over-wing lock-ring-washer, just like most Dana rears; is this common for his model ??

By the way, in the left side (only one apart yet), there was a new-looking lock-washer, with no ears folded over; no wonder the bearings were loose !!!

Neither bearing has any markings.

What are the correct numbers for all bearings, races, and the big seal ??

Thanks.