U-joint ???
#1
Registered User
Thread Starter
U-joint ???
Who makes NAPA U-joints??
Has anyone used NAPA #PUJ295 Extreme-Duty Greasable; and, are they up to the job??
The alemite is located in a cup, rather than in the cross.
Who makes O.E.M. joints in Dodge trucks of this vintage??
I have a few that were taken out of the drive-shafts of low-mileage junk-yard trucks; they are un-greasable solid-cross joints. They are like new, except for the cup-seals getting damaged from taking out the joints.
I have little confidence in un-greasable U-joints.
Are the Spicer joints for these trucks greasable??
Thanks.
Has anyone used NAPA #PUJ295 Extreme-Duty Greasable; and, are they up to the job??
The alemite is located in a cup, rather than in the cross.
Who makes O.E.M. joints in Dodge trucks of this vintage??
I have a few that were taken out of the drive-shafts of low-mileage junk-yard trucks; they are un-greasable solid-cross joints. They are like new, except for the cup-seals getting damaged from taking out the joints.
I have little confidence in un-greasable U-joints.
Are the Spicer joints for these trucks greasable??
Thanks.
#2
Registered User
Spicer u-joints ONLY !!!! Stay away from Napa's Precision u-joints. Precision is the brand. I made the mistake of using them and they didn't last a month. Replaced with Spicer u-joints and the fit was there right off the bat, and have held up for some time now. Spicer part number 5-160x premium greaseable u-joint. Spicer makes both greaseable and non for our trucks.
I imagine Spicer was OEM.
I imagine Spicer was OEM.
Thread
Thread Starter
Forum
Replies
Last Post
72dart
3rd Gen Engine and Drivetrain -> 2003-2007
3
06-19-2012 10:42 PM
wcbcruzer
2nd Gen. Dodge Ram - No Drivetrain
22
04-30-2008 06:58 PM
FDC
24 Valve Engine and Drivetrain
2
07-16-2007 12:51 PM
Treangen
3rd Gen Engine and Drivetrain -> 2003-2007
4
05-07-2007 03:10 PM