Hi,
Was just outside playin around with the fuel screw. Ended up shorting out the shutoff solenoid to something. Forgot a wrench. Anyways, saw some smoke on the fender by the starter relay... But in the little wiring that goes to the grids (i think)...

Now, I turn on the ignition, all the guages stay still, but all the warning buzzers, blower motor, lights work.

Starter will not go...


Truck is non i/c
Help!! Ideas?

 

Fusible links?

 

How do you tell if they are bad?

 

Ohm out the line with volt meter 0.00 is the bad line, any number is normaly ok

 

Got her figured... Twas a fusible link.... Im used to fuses, excuse my