1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

The time is here

Thread Tools
 
Search this Thread
 
Old Mar 4, 2006 | 08:45 AM
  #1  
timb's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 658
Likes: 1
From: Winston Oregon
The time is here

Getting ready to head to the shop and yank out the old trans and put in the DTT. I will let you all know how big the smile on my face is tonight.am also replacing the rear main seal and all of the transfer case seals while I'm there.
Reply
Old Mar 4, 2006 | 10:53 AM
  #2  
rebal's Avatar
Registered User
 
Joined: Jan 2005
Posts: 3,899
Likes: 3
From: Yuba city Kalifornia
Lucky guy, keep us on the know! and you prollly already know the rear main gos in dry? Right
Reply
Old Mar 4, 2006 | 12:31 PM
  #3  
Garz's Avatar
Registered User
 
Joined: Nov 2002
Posts: 79
Likes: 0
From: Eugene, OR
Hey Tim, I might have to come down and check out that tranny of yours. You'll be able to throw just about anything at it. How's those twins coming along?

Larry
Reply
Old Mar 4, 2006 | 08:42 PM
  #4  
timb's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 658
Likes: 1
From: Winston Oregon
I have been to busy to think about twins.the trans.was an emergency.We will be in the shop tomorrow finishing her up so get your behind down here and bring the coveralls
Reply
Old Mar 5, 2006 | 08:39 PM
  #5  
timb's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 658
Likes: 1
From: Winston Oregon
Well we got her done today, but there isnt a smile big enough to show you how I feel. .This DTT trans. is a real .I did'nt realize that I was losing so much power with the old trans. we got stuck on the freeway cause of a wreck tonight and you could sure tell the differnce between the stock converter and the DTT 91%.When she is in gear, she want's to go
Reply
Old Mar 6, 2006 | 06:48 AM
  #6  
ChrisLib's Avatar
Registered User
20 Year Member
 
Joined: Dec 2003
Posts: 1,518
Likes: 11
From: Boerne, TX
Great news! How hard does it hit thru the gears ?
Reply
Old Mar 6, 2006 | 12:13 PM
  #7  
timb's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 658
Likes: 1
From: Winston Oregon
If you are wide open, it shift's real smooth. but if you are just rolling into it, it shift's pretty firm.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
teeth
3rd Generation Ram - Non Drivetrain - All Years
6
Jun 15, 2003 12:37 AM
Dieseldude4x4
Towing and Hauling / RV
14
Dec 23, 2002 08:56 PM
Dieseldude4x4
Other
2
Oct 17, 2002 04:58 PM




All times are GMT -5. The time now is 04:45 PM.