I had my flywheel surface 2 weeks ago. Since then it has developed surface rust mainly where finger prints were. what should I do?? I sent a call over to SBC where the work was don't to ask for there opinion on it but the lines were busy. Any thoughts?? I have scotch brite pads and other options for rust removal. Or should I just run it. I'm going to see if it wipe off with a rag and brakeleen.

 

Scotchbrite will be just fine. Things like brake rotors, drums and flywheels rust all the time while installed, we just don't see it.

 

some grey scotch brite took it off to my liking. Thanks for the help.