rod and main torque specs?
03-18-2008, 02:26 PM
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: canada
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
rod and main torque specs?
Does anyone have the torque specs for the rod and main caps? I have the oil pan off and thought it might be a good time to check a couple bearings.
03-18-2008, 02:47 PM
#2
Registered User
Join Date: Feb 2007
Location: Pen Argyl Pennsylvania
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
This is from a 1989 FSM
Main caps
1st- 60 N-m (45 ft-lbs)
2nd- 119 N-m (88 ft-lbs)
3rd- 176 N-m (129 ft-lbs)
Rod caps
1st- 35 N-m (26 ft-lbs)
2nd- 70 N-m (51 ft-lbs)
3rd- 100 N-m (73 ft-lbs)
Like I said this is from a 1989 FSM and the mains go from the center out in a clockwise direction.
Main caps
1st- 60 N-m (45 ft-lbs)
2nd- 119 N-m (88 ft-lbs)
3rd- 176 N-m (129 ft-lbs)
Rod caps
1st- 35 N-m (26 ft-lbs)
2nd- 70 N-m (51 ft-lbs)
3rd- 100 N-m (73 ft-lbs)
Like I said this is from a 1989 FSM and the mains go from the center out in a clockwise direction.
Thread
Thread Starter
Forum
Replies
Last Post
lniemeyer2
3rd Gen Engine and Drivetrain -> 2003-2007
1
10-24-2012 12:11 PM
trik396
3rd Gen High Performance and Accessories (5.9L Only)
1
08-07-2006 03:09 PM