rear end width

Reply Subscribe

Thread Tools

Search this Thread

Jan 23, 2006 | 10:18 AM

flatrocktruck

Thread Starter

Registered User

Joined: Jan 2006

Posts: 24

Likes: 0

From: maine

rear end width

What is the width of a dual rear end at its widest point? (outside edge of tire tread drivers side to outside edge of tread passenger side)
My 91 d350 has singles in the rear, but I may go to dualls at some point.I want to make sure that the flatbed I will be putting on it this spring will cover the dualls if I decide to do that later on.Thanks.

Jan 23, 2006 | 10:27 AM

jiMMyCTD

Registered User

Joined: May 2004

Posts: 936

Likes: 0

From: Diamond Springs, ca

well it depend son size tire of course. but most dually rears are 65in wheel mount to wheel mount.

Jan 23, 2006 | 11:45 AM

txs

Guest

Posts: n/a

The cab and chassis dually rears are 5 or 6 inches narrower than the rears used in the regular dually trucks. Don't know but suspect that might put the cqb and chassis rears at the same width as the single wheel rears.

Jan 23, 2006 | 05:52 PM

DeanM

Registered User

Joined: Aug 2004

Posts: 201

Likes: 0

From: MA USA

It really depends on what rear end you are going to use. My tire to tire is 92" so I built my flatbed to be 94" or 95". That is if I remember correctly.

Dean