anyone know what the size of PODs are? not the physical size of them but the injector holes

 

stock 1st gen inj - 6x.009" = .000380" total cross sectional area

2nd gen 215 tips - 4x010 = .000314(17% smaller than stock)

non ic inj - 4x12 = .000452 (19% larger than ic inj)

185's = smaller than stock

190's = smaller than stock

230's = ?

300's = ?

ddp stg III = 50 LPM (liter per minute) 5 hole extrude hone inj

330's - 5x11 = .000474 (20% larger than stock)

2nd gen 370's - 5x12 = .000565 (48% larger than stock)

ddp stg IV = 55 LPM (only 10% larger than stg III's) 5 holes <.013

pods - 4x14 = .000615 (62% larger than stock)

2nd gen 435's - 5x014 = .000769 (twice as large as stock)


custom injectors -

6x13 = .000795

5x15 = .000882

6x14 = .000923

5x16 = .001005

6x15 = .001059

5x17 = .001134 (300% larger than stock)

6x16 = .001206

5x18 = .001272

6x17 = .001360

5x19 = .001416

6x18 = .001526 (400% larger than stock)

5x20 = .001570 (josh ayers custom p-pump inj)

6x20 = .001884 (500% larger than stock)

5x22 = .001900

5x24 = .002261

6x22 = .002280 (600% larger than stock)


please post the sizes for the tips that are in question (if you know them)

thanks

 

wow PODs arnt that much bigger then mine (NON IC)

 

No there not. Not a reccomended upgrade for a Non I/C truck. Your stockers can support over 300rwhp.