1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

m&h fuel pin

Thread Tools
 
Search this Thread
 
Old Jan 21, 2009 | 12:31 PM
  #1  
CTDreul's Avatar
Thread Starter
Registered User
 
Joined: Jun 2008
Posts: 27
Likes: 0
From: turner, oregon
m&h fuel pin

i just got two of new m&h fuel pins and wow what a difference i gpt a m3 and a m5 they have five different profiles to choose from

the m3 is for my dodge it doesent fuel as hard on the low end so it isnt that smokey but once the boost builds you can really feel the difference over the stock pin performance wise i gained about 6 pounds max boost which outs me right at 40 pounds and the egt only went up about 100 degrees

the m5 is for my blazer that pin is the most aggressive profile i still havent taken my blazer out yet to see the difference in power hopefully i can get to that later today
Reply
Old Jan 21, 2009 | 02:31 PM
  #2  
GasganoFJ60's Avatar
Registered User
 
Joined: Apr 2007
Posts: 1,096
Likes: 0
From: Stephenville / Harlingen Texas
Whats the price on those pins?
Reply
Old Jan 21, 2009 | 02:49 PM
  #3  
CTDreul's Avatar
Thread Starter
Registered User
 
Joined: Jun 2008
Posts: 27
Likes: 0
From: turner, oregon
$100 plus shipping
Reply
Old Jan 21, 2009 | 02:55 PM
  #4  
torqmonster's Avatar
Registered User
 
Joined: Dec 2006
Posts: 260
Likes: 0
From: Wisconsin
I'd like to know how the 5 is, subscribed.
Reply
Old Jan 21, 2009 | 04:35 PM
  #5  
Rick 12v CTD's Avatar
Registered User
 
Joined: Oct 2008
Posts: 1,591
Likes: 11
From: Thunder Bay
I'd like to see pics of these pins. subscribed too!
Reply
Old Jan 21, 2009 | 06:39 PM
  #6  
CTDreul's Avatar
Thread Starter
Registered User
 
Joined: Jun 2008
Posts: 27
Likes: 0
From: turner, oregon
i just wnt out and played with my blazer and its a totally different truck it smokes alot more pulls a lot harder i like it alot i dont have any pics right this moment but ill try to get some up a little later
Reply
Old Jan 21, 2009 | 11:39 PM
  #7  
Alwaysworking's Avatar
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
http://i289.photobucket.com/albums/l...ls2picture.jpg
Reply
Old Jan 22, 2009 | 12:24 AM
  #8  
MBolivar's Avatar
Registered User
 
Joined: Feb 2005
Posts: 297
Likes: 0
From: Waiahole, Hawaii (island of Oahu)
Nice aggressive profiles. Who makes them and where did you get them from?
Reply
Old Jan 22, 2009 | 07:56 AM
  #9  
apwatson50's Avatar
Registered User
 
Joined: May 2004
Posts: 2,867
Likes: 0
From: Golden, Colorado
Originally Posted by MBolivar
Nice aggressive profiles. Who makes them and where did you get them from?
Alwaysworking and I believe a buddy, makes them. He's sending me a M2 to try out and give some feed back on. I believe in the picture he posted that the M2 is mislabeled as a M3. So the first one labeled in the pic as M3 from the left is actually the M2. Looks like it should decrease some of my off idle/stop smoke. Thats what i'm hoping for anyways!

Aaron
Reply
Old Jan 22, 2009 | 08:54 AM
  #10  
MBolivar's Avatar
Registered User
 
Joined: Feb 2005
Posts: 297
Likes: 0
From: Waiahole, Hawaii (island of Oahu)
Thanks, Aaron.
Reply
Old Jan 22, 2009 | 10:30 AM
  #11  
cedardiesel's Avatar
Registered User
 
Joined: Nov 2007
Posts: 214
Likes: 0
From: Lebanon,TN
Is there a web site that I can access to contact them and see the pin profiles?
Reply
Old Jan 22, 2009 | 01:13 PM
  #12  
Benjamin b2's Avatar
Registered User
 
Joined: Nov 2007
Posts: 618
Likes: 0
From: Spokane WA, Family Farm
im likin the M5, has anyone dyno tested these pins? how aggressive is the M5 compared to Denny T's? im seein the potential from a stock ground pin to an after market, alot deeper.
Reply
Old Jan 22, 2009 | 01:29 PM
  #13  
dstad's Avatar
Registered User
15 Year Member
 
Joined: Dec 2008
Posts: 484
Likes: 2
From: OREGON
those pins dont sound all that bad but i still think im gonna buy a denny-t pin becacuse those things rock
Reply
Old Jan 22, 2009 | 01:50 PM
  #14  
STACKED's Avatar
Registered User
 
Joined: Jan 2006
Posts: 540
Likes: 0
From: Weatherford TX.
man that m2 has an odd profile
Reply
Old Jan 22, 2009 | 01:51 PM
  #15  
Crossy's son's Avatar
Registered User
 
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
Alwaysworking here on THIS forum is making these pins.

Just like DennyT makes his own fuel pins. he has one stage and its aggressive, a picture of DennyT's pin next to the M5 would be cool but there probably close becuase you can only go so far.

PM either one of them and im sure they'll hook you up with a pin. Its not something you buy from a diesel perf. site.
Reply



All times are GMT -5. The time now is 08:23 AM.