ive got the shakes
Registered User
Joined: Dec 2005
Posts: 52
Likes: 0
Check the drive shafts, can shake if out of balance.. Also check the pinion angle of the drive line.. Make sure the yoke is still inline with the drive shaft.. I had a lifted jeep that did the exact same thing, and had to put shims under the rear springs.
good luck.
good luck.
Thread
Thread Starter
Forum
Replies
Last Post
12valvin
3rd Gen Engine and Drivetrain -> 2003-2007
5
Aug 10, 2011 09:24 PM
blowinsmoke1
Performance and Accessories 2nd gen only
21
May 4, 2010 06:00 PM
BossHogg
3rd Gen High Performance and Accessories (5.9L Only)
28
Sep 13, 2007 08:54 PM
sajigore
3rd Generation Ram - Non Drivetrain - All Years
17
Jul 2, 2005 06:36 AM