Isspro Tach Problem
Thread Starter
Registered User
Joined: May 2003
Posts: 43
Likes: 0
From: Duluth, MN
Isspro Tach Problem
I installed an Isspro R8503 Tach and it only works from 2500 to 3200 rpm.
I checked crank sensor and was set at .040 and I reset to .050 and is still the same. Cruise control, alternator, speedometer all work and actually now can hear the turn signals which I couldn't before but would rather have the tach working any suggestions?( am sure it is wired correct to tach provision on my 93)
thanks,
gary
I checked crank sensor and was set at .040 and I reset to .050 and is still the same. Cruise control, alternator, speedometer all work and actually now can hear the turn signals which I couldn't before but would rather have the tach working any suggestions?( am sure it is wired correct to tach provision on my 93)
thanks,
gary
Thread
Thread Starter
Forum
Replies
Last Post