I have searche myself to death to find no answers.<br><br>Please Help!<br>I've got a 91 Dodge D-250 4x4 that I will be sapping in an NV 4500. I have a adapter ring (about 1.5&quot; thick) and a bell housing off of a 97. Also I have a NV4500 out of a 97. I have been told a bunch of contridicting information. Some say a direct bolt on with shifter, floor, cross member and drive shaft mods. Also someone said that 3/16&quot; needed taken off of the splines and bearing retainer. Any info would be greatly apprieciated. Thanks in advace from the poor college boy.

 

http://www.quad4x4.com<br>http://www.blumenthalmfg.com<br>http://www.standardtransmission.com

 

Thanks Monty but most have sent me after a kit. Does anyone know of someone that has done this swap without buying a swap kit??

 

i don't know the whole story, but you do have to have the slave/master cyl for the clutch off the 97 as well

 

I have got the slave and m.c. also. I was told that this would mount directly up to my pedal and also told otherwise.<br><br>I'm really starting to think about taking everything back and buying a kit.<br><br>Any more info would still be great thanks.