HELP Getrag Ragged NV4500 swap
#1
Registered User
Thread Starter
Join Date: Apr 2003
Location: Stillwater OK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
HELP Getrag Ragged NV4500 swap
I have searche myself to death to find no answers.<br><br>Please Help!<br>I've got a 91 Dodge D-250 4x4 that I will be sapping in an NV 4500. I have a adapter ring (about 1.5" thick) and a bell housing off of a 97. Also I have a NV4500 out of a 97. I have been told a bunch of contridicting information. Some say a direct bolt on with shifter, floor, cross member and drive shaft mods. Also someone said that 3/16" needed taken off of the splines and bearing retainer. Any info would be greatly apprieciated. Thanks in advace from the poor college boy.
#2
Administrator
Re:HELP Getrag Ragged NV4500 swap
#3
Registered User
Thread Starter
Join Date: Apr 2003
Location: Stillwater OK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re:HELP Getrag Ragged NV4500 swap
Thanks Monty but most have sent me after a kit. Does anyone know of someone that has done this swap without buying a swap kit??
#5
Registered User
Thread Starter
Join Date: Apr 2003
Location: Stillwater OK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re:HELP Getrag Ragged NV4500 swap
I have got the slave and m.c. also. I was told that this would mount directly up to my pedal and also told otherwise.<br><br>I'm really starting to think about taking everything back and buying a kit.<br><br>Any more info would still be great thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Chazmanian
3rd Generation Ram - Non Drivetrain - All Years
8
04-04-2008 02:16 PM