Ok. I have been thinking about putting a IC Cummins into another vehicle other than a Dodge truck, emphasis on truck. I have been looking at E-vade and was wondering what would be a good canidate

I could post all the links but here is my top 3.

Chevy Dually

Ford Bronco

And a personal favorite of my family

Chevy Blazer

I looked at Ram Chargers but they are either way outta price range or too far away.

What do you all think?

Jon

 

If you want truck, the Chevy would be the way to go. I always thought a Suburban would be the way to go. Either that or a newer Chevy extended cab (1992-1998), but swapping in the Dodge axles.

 

Well I'm putting my CTD into my motorhome which is a chevy 1 ton chassis from 73. I'll let you know how it goes but I have alot more room to work with than someone with a truck.
That said, I've seen tons of pics and read alot on this swap and from what I can tell if it's a 4by then you have to do a body lift and still possibly some calibrated tapping to clearance the firewall. Still pretty doable though...

 

That dually is slick but here is another one. And it is only about 2 hours from me. Also, as a extra benefit, I go through my aunts town and they are HUGE Chevy fans

http://cgi.ebay.com/ebaymotors/ws/eB...m=110163157049

 

I say the blazer or the last truck there. Both would be slick.

 

The blazer.
Get it built and lifted with some boggers and then we'll have to meet up with a friend of mine who put an International 7.3 in hs bronco.
Pourin' smoke and flingin' mud !!!


Id put it in the bronco just to make the Ford guys mad