I think I would rather rebuild one than switch to a NV4500. Can I get a copy of that manual? The pdf link doesn't work.

ridingthenorthface@hotmail.com

Thanks
Tyler

 

when you open up the getrag look what caused it to go bad. mine was the very small OD bearings. the metal chewed up alot of stuff. its a very weak spot. I did not go back to using the 5-30wt oil. its synthetic 75-90-, works in the cold. most important is put a temp gauge in it. they can run VERY hot in 5th when towing heavy. I ended up buying a gearvendors to over drive 4th. its direct and does not heat up at all when towng hard. then I double OD when empty.

 

rebuild maunual http://homepage.mac.com/nieszrj/.Public/GetragG360.pdf
parts blumenthals 888-236-4800

 

Hello, could I get a copy of the rebuild procedure for the getrag 360. Email is cumminsdiesel5.9@hotmail.com. Thank You.

 

can someone please send me a copy to henrysc@sbcglobal.net


thank you.

 

Dieselcrazyw350, Power Ram 250 C, here is the getrag 360 manual.
http://pc-guy.ca/Dodge/Getrag-pdf/

 

I would like to locate a rebuild manual on the 360 Getrag also.
Thanks, rwmcfarland_24@bellsouth.net

 

Where can i get a 93 FSN manual for my getrag cause im tired of alwnys pullin it out and takin it to someone

 

You guys are silly. 3 posts up is a link to the pdf.

 

i didnt look at it that good sorry

 

Hi I have a 1992 dodge d250 with a g 360 and I'm trying to rebuild it I was wondering if any one knows where to get a rebuild manual for thes granny's or I'f they have one an can email it to me thank justin ....thunder_fan_8@yahoo.com

 

I am unable to get the link to work. WOuld someone email the manual to me at virgilroberts@hotmail.com

Thanks

 

I just ran across this post. I am looking to buy a getrag to swap in to my '93. The trans sticks in 2nd so I think I need a rebuild. Can someone please send me a copy of the manual. All previous links do not seem to be working any more. Thanks in advanced. dhopkins@ddspinners.com

 

http://pc-guy.ca/Dodge/Getrag-PDF/GetragG360.pdf

 

hey whats going on guys i need a manual sent to me please for the getrag g360 5 speed its all apart and i need to put it together my email is trparker28@yahoo.com thank you much