Pm me your email

 

hey 12v@heart glad to see your a true blooded american and drive a 1st gen. same here. but im rebuilding my getrag and cant find a manual anywhere. think u can hook me up with a copy of it? my e-mail is krazkykarl454@hotmail.com

 

copy sent

 

I have pics of mine and I tried to post some, but for some reason I cant. I took pics from removing the cover threw each gear (how to remove it & how it sat on the shaft). I was going to do something for the sticky but when the pic are made full screen they get a little out of focus so I didn't right it up. I replaced every bearing and seal. I bought my parts from acerl (TRANSPART WAREHOUSE) on e bay, the guys name is Randy. I spoke to him on the phone and he helped me with a lot of questions. I don't usually do this but, I'd recommend him. MrExtream bought his parts from him also when he had his rebuilt and he told me he was happy with him as well. I just finished putting all but the cover on so I have a lot of info on what I did (with pics) to where I bought parts. I just bead blasted the cover and its waiting for me to put it (the cover) back together, and paint it, in my basement. I obviously haven't tested it yet, but I did everything by the book. I thought it was simple to take apart and put back together. This was my first trany rebuild. The challenging part for me was tracking down the sealers they want you to put it back together with and the hard work was cleaning everything.

 

hey krazykarl i emailed you but it bounced back , shoot me an email and i'll send you a copy johns4whln@hotmail.com

 

Can someone please email the G-rag rebuild section to me. jmresutt@att.net
That would be great! I really don't need ,or want the whole manual. As you can see below, I am using the 91 as a donner for the engine and chassis.
Thanks
Ray

 

Old stuff sent you the rebuild manual

 

I would appreciate a copy of the manual too ...thanks rook
rook440@mchsi.com

 

Just got the rag manual back on my newish computer so if you need it feel free to ask and I'll send it

rook I will send it your way in a few minutes

 

Off topic, but Bearings Incorporated is a great place to get Timken Bearings... I believe they are nation wide?

 

I could use that same one, Thanks

 

Here is a pdf copy of the getrag manual everyone likes to have. Dave could you put this getrag manual in the sticky for everone please?
http://www.drivetrain.com/parts_cata...ustration.html
http://dkorp.ca/dodge/Getrag-pdf/

 

hey guys im new to this forum but i also have a 91 w250 cummins with the g360 and i need to rebuild mine as welll could i please have a copy of the manual thanks so much. My email is hondarox313@yahoo.com

 

I also need to rebuild a360. I found a good parts supplier in terry at tb trans. But i need the overhaul suppliment, can't get the pdf off web. Can anybody e-mail it to me at petef-1@hotmail.com please?

 

Thats where I got most of the stuff for the old mans tranny, Terry treated me right.

I'll send the manual in a few