1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

fuel pin

Thread Tools
 
Search this Thread
 
Old Nov 15, 2008 | 10:12 PM
  #1  
Joker12valve's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 114
Likes: 0
From: Stevens Point WI
fuel pin

looking to get one what would you recomend and where do i get one from thanks
Reply
Old Nov 15, 2008 | 11:20 PM
  #2  
921stgen's Avatar
Registered User
 
Joined: Jan 2008
Posts: 154
Likes: 0
From: Springfield, Ohio
Get a DennyT fuel pin they are $100 shipped to your door and the best one you can buy. Just Pm him he is a member here.
Reply
Old Nov 16, 2008 | 04:23 AM
  #3  
NotEnufGarage's Avatar
Registered User
 
Joined: Jun 2008
Posts: 531
Likes: 17
From: Rocket City USA - AKA Huntsville, AL
I second that. I love mine.
Reply
Old Nov 16, 2008 | 08:02 AM
  #4  
Bob Beauchaine's Avatar
Registered User
 
Joined: Oct 2002
Posts: 872
Likes: 1
From: Gaston OR
I agree. I had an Old Smoky pin and if you compare the two you can see why DennyTs pin is so much more aggressive and performs so well.

Bob
Reply
Old Nov 16, 2008 | 10:59 AM
  #5  
1985cucv's Avatar
Registered User
 
Joined: Apr 2008
Posts: 1,960
Likes: 1
From: wisconsin
denny t stage 2 good product cheap and he is a good guy and willing to help i would buy another one if i had another truck
Reply
Old Nov 16, 2008 | 03:01 PM
  #6  
Joker12valve's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 114
Likes: 0
From: Stevens Point WI
what dose he go by on the site, any one have more contact info. I have the money burning a hole in my pocket.
Reply
Old Nov 16, 2008 | 03:38 PM
  #7  
Mattster's Avatar
Registered User
 
Joined: Aug 2007
Posts: 515
Likes: 1
From: Port Orchard,WA
His username on here is DennyT.
Reply
Old Nov 16, 2008 | 04:43 PM
  #8  
Joker12valve's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 114
Likes: 0
From: Stevens Point WI
thanks for the info
Reply
Old Nov 16, 2008 | 04:56 PM
  #9  
firstgenman's Avatar
Registered User
 
Joined: Aug 2005
Posts: 22
Likes: 0
From: Southwest Virginia
how much more aggressive is the dennyt pin compared to the bully dog pin?
Reply
Old Nov 16, 2008 | 05:09 PM
  #10  
Free89W350's Avatar
Registered User
 
Joined: Feb 2007
Posts: 1,540
Likes: 0
From: Pen Argyl Pennsylvania
I don't have either but from what I hear Denny's pin is more agressive and is stronger the bully dogs tend to get a valley in them from the inner pin riding on it. Somebody correct me if I wrong please.
Reply
Old Nov 16, 2008 | 05:20 PM
  #11  
Crossy's son's Avatar
Registered User
 
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
Bully dog pins are no good. they groove, ive held one in my hand and they groove.

Someone had a pic on there profile of the differences between a DennyT stage 2 pin and a bullydog pin and the difference is substantial. the Dennyt is alot more controllable on the lowend then the bullydog pin, and DennyT provides MORE power on the top end.

Get a DennyT Stage 2
Reply
Old Nov 16, 2008 | 06:12 PM
  #12  
DodgeFreak's Avatar
Registered User
 
Joined: Mar 2006
Posts: 665
Likes: 2
This is what DennyT pm'd me back in oct. for my cousins truck, He hasn't decided on one yet so i have no info as for how it runs. Just thought you might like to know.

The pins are now 105 to cover higher shipping cost. The egts go up about 150 degrees and the boost can be anywhere from 5 to 10lbs depending on the pump setup.
Reply
Old Nov 17, 2008 | 11:27 PM
  #13  
Dave F's Avatar
Registered User
 
Joined: Nov 2006
Posts: 134
Likes: 0
From: Central Washington; 2 hours from n e fn ware
I GOTTA have one too! DENNNNNEYYY!!
Reply
Old Nov 18, 2008 | 11:26 PM
  #14  
Dave F's Avatar
Registered User
 
Joined: Nov 2006
Posts: 134
Likes: 0
From: Central Washington; 2 hours from n e fn ware
btw, pm sent
Reply
Old Nov 19, 2008 | 12:42 AM
  #15  
crewctd's Avatar
Registered User
 
Joined: Sep 2007
Posts: 22
Likes: 0
I found dennyT. http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us
Reply



All times are GMT -5. The time now is 10:28 AM.