# of flywheel teeth?
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: Northern Indiana
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
# of flywheel teeth?
Anybody know the number of teeth on the first gen manual trans flywheel? I'm installing a tach which uses a magnetic pickup and I can't get an eyeball in there to count.
Thanks,
Brian
Thanks,
Brian
#3
Registered User
Thread Starter
Join Date: Dec 2005
Location: Northern Indiana
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Bill.
I think I can count the teeth through that little vent dealie in the bottom of the bell housing, but thats going to take talking the girly into crawling in there and watching while I bar it over from the front. Will probably be expensive.
You ever get up around South Bend?
I think I can count the teeth through that little vent dealie in the bottom of the bell housing, but thats going to take talking the girly into crawling in there and watching while I bar it over from the front. Will probably be expensive.
You ever get up around South Bend?
#7
Patron Saint of 1st gens
Join Date: Jun 2002
Location: British Columbia, Canada
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
...WOW that HAS to be the most unlikely question I've seen on a site in all the time I've been frequenting them....
THAT is a great example of someone going out of there way to help another guy.
Just goes to show you, NO question is "to stupid"....
pb....
THAT is a great example of someone going out of there way to help another guy.
Just goes to show you, NO question is "to stupid"....
pb....
Thread
Thread Starter
Forum
Replies
Last Post
Jona Gold
3rd Gen Engine and Drivetrain -> 2003-2007
27
01-03-2024 07:54 AM