1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Flat spot

Thread Tools
 
Search this Thread
 
Old Nov 20, 2006 | 11:28 PM
  #1  
D/UNIT's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 71
Likes: 0
From: NAMPA ID.
Flat spot

im new to this site. heres my question, at about 1600-1700 rpm,s i get a flat spot.it does it at low boost 0-10lbs in all gears, ive tried adjusting the afc star wheel down but doesnt help, the engine runs very well other than that.any suggestionson what to check would be appreciated.

Thanks
Reply
Old Nov 20, 2006 | 11:41 PM
  #2  
flashgordon's Avatar
Registered User
 
Joined: Mar 2006
Posts: 2,319
Likes: 1
From: WY
Next time your in there adjusting the star wheel, take a go look at the fuel pin and make shore its moving freely..............not the vertical one(like an old smoke pin.) but the horizontal pin that ride up against the vertical pin!!

Push it in and them open the throttle and see if it snaps back out!



O and by the way WELLCOME ABOARD.....there's lots of grate people and cool stuff here!!!!!
Reply
Old Nov 21, 2006 | 09:22 AM
  #3  
D/UNIT's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 71
Likes: 0
From: NAMPA ID.
ill check it out thanks,

looks like you have a good first gen section.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BIGRIG10
HELP!
10
Nov 2, 2007 01:33 PM
Bigg_billy
HELP!
2
Aug 22, 2007 11:23 PM
gunracer1
Performance and Accessories 2nd gen only
2
Jan 3, 2005 10:52 PM
AK RAM
3rd Gen High Performance and Accessories (5.9L Only)
10
Dec 9, 2004 12:33 PM
twhite
24 Valve Engine and Drivetrain
1
Aug 18, 2003 07:26 PM




All times are GMT -5. The time now is 12:37 AM.