Dodge Diesel - Diesel Truck Resource Forums

1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Factory fuel screw settings????

   
Old Feb 22, 2010 | 06:46 PM
Share
  #1  
dstad's Avatar
dstad
Thread Starter
Registered User
15 Year Member
 
Joined: Dec 2008
Posts: 484
Likes: 2
From: OREGON
Factory fuel screw settings????
I'd like to know how many turns my fuel screw is turned in. Does anybody know how many turns it would be from the bottom out to the factory location.
Reply
0
Old Feb 22, 2010 | 08:40 PM
Share
  #2  
dstad's Avatar
dstad
Thread Starter
Registered User
15 Year Member
 
Joined: Dec 2008
Posts: 484
Likes: 2
From: OREGON
Bump Bump Bump
Reply
0
Old Feb 22, 2010 | 08:51 PM
Share
  #3  
Benjamin b2's Avatar
Benjamin b2
Registered User
 
Joined: Nov 2007
Posts: 618
Likes: 0
From: Spokane WA, Family Farm
my 93 was 1.5 turns from the collar, my non ic 91 was almost a full turn from the collar, if you can see where the collar used to be, you can almost guess where it was stock. hopefully this helps.
Reply
0
Old Feb 22, 2010 | 09:28 PM
Share
  #4  
dzl_damon's Avatar
dzl_damon
Registered User
 
Joined: Nov 2007
Posts: 1,816
Likes: 0
From: Maine
my 89 was only about 1/2 turn from the collar. They are all different.
Reply
0
Old Feb 22, 2010 | 09:31 PM
Share
  #5  
Richie O's Avatar
Richie O
366 Spring Chicken
 
Joined: May 2008
Posts: 2,105
Likes: 3
They are all different as DZL DAMON says. The pump is set at a flow setting from the factory. They run the pump on a stand and adjust to the flow rate to what they are after.
Reply
0
Old Feb 23, 2010 | 09:32 AM
Share
  #6  
DNRCustoms's Avatar
DNRCustoms
Registered User
 
Joined: Dec 2007
Posts: 1,341
Likes: 1
From: Richmond, MI
On average the ones I have done have been about .700 from the backside of the lock nut to the end of the fuel screw. this is on i.c models, non i.c ones are like .600 I think!!
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fuel screw o ring frayed gas leaking unless its screw all the way in. HELP please
jmd4993
1st Gen. Ram - All Topics
3
Jun 22, 2013 07:36 AM
Full Fuel Screw vs. Fuel Pin
Blowndodge
1st Gen. Ram - All Topics
11
May 19, 2011 09:43 AM
power screw/smoke screw tweaked
loudcummmin
1st Gen. Ram - All Topics
3
Oct 3, 2005 02:44 PM
Back to Subforum
1st Gen. Ram - All Topics
View Next Unread
check out my gauge pod and headliner


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 03:00 PM.