Drags open friday
Drags open friday
I am going to take my truck to the drags tomorrow and was wondering what you guys think it will run,it is a early 91 D250 reg.cab,fuel screw 1/4 turn from runaway,fuel pin ground,no AFC spring,K&N air filter,4" down pipe to 5" stack,31x12x3 air to air intercooler.Still running stock turbo,injectors,trans,governor spring,and lift pump
Registered User
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
We'll cya there! you going to cecil?
I'm gonna say 15.3 if it is a one wheel peeler.
I remember talking to you guys at cecil when you had your other truck that was IDENTICAL to that one and you guys ran a 13.9 with a welded rear.
Ours had same mods almost and ran 15.5 spinning the tire bad.
Is the D250 shortbed truck the prostreet one you guys got?
I'm gonna say 15.3 if it is a one wheel peeler.
I remember talking to you guys at cecil when you had your other truck that was IDENTICAL to that one and you guys ran a 13.9 with a welded rear.
Ours had same mods almost and ran 15.5 spinning the tire bad.
Is the D250 shortbed truck the prostreet one you guys got?
Registered User
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
mid 14's.
I'm not sure on that one. Your other truck with a baby h1c and stock tranny was deceiving running a 13.9
This one should be a mid to low 14 second truck.
anything this truck does'nt have done to it that your other blue one did?
I'm not sure on that one. Your other truck with a baby h1c and stock tranny was deceiving running a 13.9
This one should be a mid to low 14 second truck.
anything this truck does'nt have done to it that your other blue one did?
We'll cya there! you going to cecil?
I'm gonna say 15.3 if it is a one wheel peeler.
I remember talking to you guys at cecil when you had your other truck that was IDENTICAL to that one and you guys ran a 13.9 with a welded rear.
Ours had same mods almost and ran 15.5 spinning the tire bad.
Is the D250 shortbed truck the prostreet one you guys got?
I'm gonna say 15.3 if it is a one wheel peeler.
I remember talking to you guys at cecil when you had your other truck that was IDENTICAL to that one and you guys ran a 13.9 with a welded rear.
Ours had same mods almost and ran 15.5 spinning the tire bad.
Is the D250 shortbed truck the prostreet one you guys got?
Trending Topics
Registered User
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
I'm supposed to go with my buddy and his 91 stang GT. :yuk: Its stock
It depends though, He's broke so I don't know if I'm going.
My dad is going skiing at this ski event a Local radio station hosts.
It depends though, He's broke so I don't know if I'm going.
My dad is going skiing at this ski event a Local radio station hosts.
No the trucks not back together yet. I am still waiting on parts from Goerend


. Everything else is just sitting here all ready to go in.
Registered User
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
for his 50th birthday today
he went with some friends.that sucks goerend is taking so long.


