1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Door hinge

Old Mar 1, 2010 | 06:28 AM
  #1  
Onemoparnut's Avatar
Thread Starter
Registered User
 
Joined: Apr 2007
Posts: 4,062
Likes: 0
From: Southern New Jersey
Door hinge

I am in need of a pin and bushing for the driver side lower hinge. Does anyone know what the correct part number is.
Reply
Old Mar 1, 2010 | 06:34 AM
  #2  
Crossy's son's Avatar
Registered User
 
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
Shoot i think my dad just bought the pins off ebay.

http://cgi.ebay.com/ebaymotors/84-85...Q5fAccessories
Reply
Old Mar 1, 2010 | 07:24 AM
  #3  
Onemoparnut's Avatar
Thread Starter
Registered User
 
Joined: Apr 2007
Posts: 4,062
Likes: 0
From: Southern New Jersey
That's just what I was looking for thanks a lot brandon
Reply
Old Mar 1, 2010 | 07:55 AM
  #4  
Free89W350's Avatar
Registered User
 
Joined: Feb 2007
Posts: 1,540
Likes: 0
From: Pen Argyl Pennsylvania
I got mine from the local autoparts store in the help section. They say right on the package Dodge 19??-19?? door hinge and bushing kit.
Reply
Old Mar 1, 2010 | 08:12 AM
  #5  
19mike92's Avatar
Registered User
 
Joined: Sep 2009
Posts: 479
Likes: 0
From: Collingwood Ontario, Canada
ya i got mine through napa. there a semi universal fit so they had them in stock
Reply
Old Mar 1, 2010 | 09:43 AM
  #6  
Onemoparnut's Avatar
Thread Starter
Registered User
 
Joined: Apr 2007
Posts: 4,062
Likes: 0
From: Southern New Jersey
I looked at the parts store but they just said fits dodge but it didn't say what dodge they fit. It could be for a car or truck it didn't say
Reply
Old Mar 1, 2010 | 10:30 AM
  #7  
westco's Avatar
Registered User
 
Joined: Feb 2010
Posts: 23
Likes: 0
From: Pauma Valley,Ca
Thanks for the ebay link...I just bought a set for my truck, although it's in pretty good shape i'm taking off the doors for some bodywork and gonna replace them "while i'm there".
Reply
Old Mar 1, 2010 | 09:13 PM
  #8  
Onemoparnut's Avatar
Thread Starter
Registered User
 
Joined: Apr 2007
Posts: 4,062
Likes: 0
From: Southern New Jersey
I just ordered a set also I think that guy owes you a free set for advertisement brandon. HAHAHA
Reply
Old Mar 1, 2010 | 09:28 PM
  #9  
lovin1stgens's Avatar
Registered User
 
Joined: Mar 2009
Posts: 493
Likes: 2
From: Columbus Indiana
my dodge was doin the door saggin thing and when you wanted to open the door you had to push in hard to get it to open. (the button wasnt able to be pushed in far enough) and now thats real easy. but, the new problem is the lock mechanism was so used to the door sagging it moved to fit that, and now that it isnt sagging the lock isnt work right. does napa or anyplace carry those?
Reply
Old Mar 1, 2010 | 09:30 PM
  #10  
TIMMY22's Avatar
Registered User
 
Joined: Nov 2005
Posts: 1,971
Likes: 1
From: Land of milk and honey.
After you install them, adjust your striker. The door should close like new.
Reply
Old Mar 1, 2010 | 09:36 PM
  #11  
TIMMY22's Avatar
Registered User
 
Joined: Nov 2005
Posts: 1,971
Likes: 1
From: Land of milk and honey.
I'll be a little more specific, On the door jam, Near the Vin sticker is the striker. You need a big wrench and an allen wrench (not sure the size off hand).

Loosen the striker, and move it usually up and back 1/4" each way. This depends on how the door sits. If it acts like it lifting as it contacts, lower it. If it's closing level but just loose, move it back (in) for a tighter close.
Reply
Old Mar 2, 2010 | 06:30 PM
  #12  
lovin1stgens's Avatar
Registered User
 
Joined: Mar 2009
Posts: 493
Likes: 2
From: Columbus Indiana
ill give it a shot. thanks for the advice
Reply
Old Mar 2, 2010 | 09:01 PM
  #13  
dzl_damon's Avatar
Registered User
 
Joined: Nov 2007
Posts: 1,816
Likes: 0
From: Maine
Stuff like that are on the wall in every Napa. Less than $10
Reply
Old Mar 6, 2010 | 07:40 PM
  #14  
lovin1stgens's Avatar
Registered User
 
Joined: Mar 2009
Posts: 493
Likes: 2
From: Columbus Indiana
ten bucks is cheap. lol
Reply
Old Mar 6, 2010 | 09:01 PM
  #15  
duallybuster350's Avatar
Registered User
 
Joined: Feb 2010
Posts: 25
Likes: 0
From: San Diego California
I own a bodyshop and we do door hinges all day long. I always order my parts from autobodytoolmart. p/n 9965 price is 59.99
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:05 PM.