Cleaned HVAC box...
Thread Starter
Registered User
Joined: Aug 2007
Posts: 353
Likes: 0
From: VICTORIA B.C.
Cleaned HVAC box...
So I decided to clean out my heater box to day using thge thread in the sticky. Instead of cutting a big chunk out I used a hole saw 1 3/8. (I had a rubber grommet plug to fit the hole) Using a coat hanger and a vacuum with a peace of 5/8 heater hose taped to the end I got 2 big handfuls of leaves out of it and all the small stuff went in the vacuum.
Tested it after and did notice an air flow increase.
Just wanted to say thanks DTR
Tested it after and did notice an air flow increase.
Just wanted to say thanks DTR
DTR's "Cooler than ice cubes 14 miles North of North Pole" member
Joined: Oct 2006
Posts: 1,797
Likes: 9
From: 14mi North of North Pole
I did the same thing last fall with a 2 5/8 grommet off a 2nd gen firewall. Took about 10 minutes to do and made a big diference.
DTR's "Cooler than ice cubes 14 miles North of North Pole" member
Joined: Oct 2006
Posts: 1,797
Likes: 9
From: 14mi North of North Pole
Registered User
Joined: Jan 2006
Posts: 1,237
Likes: 0
From: Raleigh, NC
Thread
Thread Starter
Forum
Replies
Last Post
92'1stGen
1st Gen. Ram - All Topics
44
Jun 10, 2011 09:07 AM
JasonblkZ06
2nd Gen. Dodge Ram - No Drivetrain
2
May 11, 2007 05:46 PM
