Still at it with these freakin brakes. Not sold on these speed bleeders I invested in. I believe what J says about those- that air will still suck in via the threads during the pedal upstroke so I am going back to simple and install plain Jane bleeder screws. Anyone log down dorman part #'s for the rears and fronts bleeder screw type and thread pitch? Can't pull mine off and take them in for obvious reasons

 

Found it so I'll post here the thread pitch and part numbers from dorman to help anyone out- rear wheel cylinders 3/8" x 24 x 1 1/4" in length part #13901. For front calipers M10 x 1.5 x 30mm in length part #13908. Speed bleeders, should you want those, are part #'s 12701 for rears and 347139 for fronts