Well I didn’t survive round one, but now I have some better parts and we will have to see if it survives round two. I went and picked up my pickup last night when I got off work. Started right up and purred like a little kitten.

I was cruising down the highway at 70mph boost read 6psi and the pyro was sitting at about 700*. I was coming up to a little hill so I stabbed the throttle about 1/3 of the way boost shot to about 30-32psi and the pyro started to climb leveling off at about 1000*. It felt so good to be driving it again. I have to wait a week or two so I can re torque the head and then I will see what it does at full throttle. It runs so good.

THANK YOU PONCI'S DIESEL CENTER(BRAD)

I ended up with a stage two ported/polished/o-ringed head, ats 3 piece manifold, arp 12mm stud kit. I guess I will have to update my sig.

I also saw pic's of my flanges for my twins and they should be here anytime so Brad and I can get started on my twins. Then I will have some fun.

Stomp

 

Glad to hear that you are up an running again. Most guys and trucks that I know of have a tendency to run better after a nice head job. I'm looking forward to seeing some big numbers. By the way...since you got your truck back, hook me up with that part #. I dont want to let you get too far ahead of me!
Cody

 

LOL Hey hold your horses I am at work right now I should have some down time next hour so I will run out and get that part number for you.

Stomp

 

NeedMorePower here is the pats number and a pic. You can order it from summit for around $88.

P/N crtp4601hp


Stomp

 

Thanks! Thats just what I needed.

 

is that a pusher pump????

 

Yes it is.

Stomp