1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Automatic HP ?

Thread Tools
 
Search this Thread
 
Old Jul 17, 2007 | 07:38 PM
  #1  
DLittle's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 282
Likes: 2
From: Richland, Washington
Automatic HP ?

I was just wondering what the highest HP/TQ achived in a non lockup 1st gen automatic ? Anyone over 400hp/800tq ? Is it possible without the lockup torque converter ?

So all you automatic guys that have dyno'd post some #'s

I'll start 301hp/538tq with a completly stock auto. #2 only
Reply
Old Jul 18, 2007 | 05:51 AM
  #2  
JD730's Avatar
Registered User
 
Joined: May 2005
Posts: 2,510
Likes: 1
From: Belvidere, NJ
367/847 with a lockup trans, found out later that the front clutch was gone at the time of the dyno. Fuel screw bottomed out, 3200, custom fuel pin, plus the mods in my sig.
Reply
Old Jul 18, 2007 | 08:44 PM
  #3  
DLittle's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 282
Likes: 2
From: Richland, Washington
No other coments or thoughts anyone.

I'm just wondering if it's worth while to completly rebuild the tranny with improvements tosee if I can get to 400hp with a non-lockup tranny.
Reply
Old Jul 18, 2007 | 10:39 PM
  #4  
bgilbert's Avatar
Registered User
 
Joined: Apr 2005
Posts: 3,253
Likes: 0
From: Terre Haute,IN
I think the late Pastor Bob was the highest HP 518 truck with 373hp. But that was before injectors hotter than POD's and other improvements that are available now. If my truck is still together by next month, (Friday night drag racing) I'll dyno it with the new additions, Scheid injectors and SP66 on the auto truck. I would guess very close to 400rwhp after the first test drive after the charger install.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sam
24 Valve Engine and Drivetrain
3
Mar 31, 2003 09:04 PM
kevinn
24 Valve Engine and Drivetrain
6
Nov 11, 2002 07:59 AM
engcogod
24 Valve Engine and Drivetrain
16
Oct 29, 2002 07:28 PM
hellotbone
HELP!
2
Oct 24, 2002 07:54 PM
akgoldminer23
24 Valve Engine and Drivetrain
8
Oct 5, 2002 11:07 PM




All times are GMT -5. The time now is 05:29 AM.