Mieser

I couldn't find my notes, so I had to measure on the truck.

Length 6.625-6.75" long
Drop 2.5-2.625" drop ( the arm seats HIGH on the steering box shaft also )

Hope this helps.

texsasdiesel

heard anything yet?

James

BILTIT

Not yet, hoping monday or tuesday.

texsasdiesel

cool, didn't want the thread to die.

Thanks,
James

1990

I picked up a steering arm from WFO Concepts. Going to piece together the stuff my self.


Thanks.

BILTIT

Picking up the pitman arm tonight.

BILTIT

Have the new pitman arm in my hands.

C-C=6.75''
drop=~1''

Going to see if it will fit.

BILTIT

So....................... it fits on the steering shaft etc. Looks like it would work but..............................the drag link will be tricky as it is very close to the crossmember.

BILTIT

one more.

Hoping meiser could take some pics of his setup lock to lock so i can see how far the pitman arm needs to travel. Going to call NWFab tomorrow as i haven't heard a word from them, might get them to bend me a different drag link and try it if possible. I will send them the pics and see what they think. Only other option is too get the wj and go from there, means more waiting.

BILTIT

Anyone know who can ream the wj arm and would have one in stock? Need one quick! Should have ordered one before, it may work with this existing draglink. I will ask NWFab since they owe me bigtime.

Rick 12v CTD

looks like the drag link would work with that 1" drop arm if the bend in the drag link was closer to that ball joint...

BILTIT

Im not sure, in the pictures the pitman arm is straight ahead and when i turn it would push the draglink even further into the crossmember. Not sure if there is enough room to move the bend that close towards the pitman arm end.

1990

Looks like a mostly straight draglink with only one bend like miesers would work the best.

When i do mine i'm going to try and use the stock 2WD pitman arm.

BILTIT

Do you have a picture of a stock 2wd arm?

Jungle

Is the steering box moved back to the 2wd location?
Jim