Another leveling question, this one a little different.
#1
Registered User
Thread Starter
Join Date: Aug 2008
Location: Tracy, CA
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Another leveling question, this one a little different.
At least according to my searches, most seem to be talking about front to back. My truck sits lower on the drivers side. I assume the springs are probibly sagging more on the drivers side, maybe because of the fuel tank or ???
( I would blame the fat assed driver, but I just got it so )
Any chance of fixing this for 1-200 bucks ? Most of the other threads ( front and back leveling ) seem to reccomend some skyjacker springs, but I would be looking at ~600 bucks for all 4 corners. I dont really care about the lift either, just want it to sit level.
( I would blame the fat assed driver, but I just got it so )
Any chance of fixing this for 1-200 bucks ? Most of the other threads ( front and back leveling ) seem to reccomend some skyjacker springs, but I would be looking at ~600 bucks for all 4 corners. I dont really care about the lift either, just want it to sit level.
#2
Registered User
Well, on the cheap you could pull the drivers side leaf pack apart and pin a 1/2" block under there, or cut and old leaf with the hole already in it.. But make sure you buy a new center pin... That is the cheapest way to solve your problem, even new skyjacler springs won't help much,,, They sag new!!
#3
Registered User
Join Date: Jan 2007
Location: Ontario ,Canada
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Search the first gen section for front air bags . There have been a few guys on here make their own kits . It will maybe cost a little more than $200 but I think it would be worth it.
Thread
Thread Starter
Forum
Replies
Last Post
SSV1761982
HELP!
4
08-16-2009 09:38 AM
Fisherguy
3rd Gen High Performance and Accessories (5.9L Only)
29
08-06-2009 12:45 PM
KyDozer
3rd Gen High Performance and Accessories (5.9L Only)
1
04-29-2009 09:50 PM
Dave88LX
Performance and Accessories 2nd gen only
4
12-08-2006 02:53 PM