92 w250 interior door arm rest/ grab handle
#1
92 w250 interior door arm rest/ grab handle
I've searched through a large number of threads on here about trying to get a solid option to repair/replace the inner door arm rests/grab handles on my dodge pickup. I found a few websites and a few phone numbers, none of them had anything in stock.
The plastic is broken like sooooo many of you guys, but I would LOVE to find a replacement or a repair option, it drives me crazy, my interior is really nice, except for this glaring flaw anytime me or a passenger ( both door arm rests are broken) tries to close the door.
Any help?????
The plastic is broken like sooooo many of you guys, but I would LOVE to find a replacement or a repair option, it drives me crazy, my interior is really nice, except for this glaring flaw anytime me or a passenger ( both door arm rests are broken) tries to close the door.
Any help?????
#2
Registered User
Join Date: May 2011
Location: New Waverly, Tx
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
There was a thread recently and I think Dodge quit making the passenger side and had like 8 left of the driver side. As far as aftermarket goes, I haven't seen much to look at. I need a driver side but their like 65 bucks from dealer.
#3
Registered User
I saw a thread quite some time ago for just this issue. Whoever it was used 3/4" boards, cut them to shape, marked and drilled holes in the stock location of the door panel and inserted t-nuts in the boards. Then he covered them in foam and wrapped them with some sort of upholstery. Something I intend to do when mine give up.
I actually just bought a driver side arm rest / handle from the dealer. I should be getting it tomorrow.
I actually just bought a driver side arm rest / handle from the dealer. I should be getting it tomorrow.
#4
Registered User
I saw a thread quite some time ago for just this issue. Whoever it was used 3/4" boards, cut them to shape, marked and drilled holes in the stock location of the door panel and inserted t-nuts in the boards. Then he covered them in foam and wrapped them with some sort of upholstery. Something I intend to do when mine give up.
That's actually very clever....Hmmmmmm.....
#5
Registered User
I take that back. The stock screws angle into the stock arm rest. However, there is plenty of horizontal real estate to drill into for the bolts to go in vertically.
Thread
Thread Starter
Forum
Replies
Last Post
yotd1976
3rd Generation Ram - Non Drivetrain - All Years
16
02-24-2009 01:41 AM
graynn
3rd Generation Ram - Non Drivetrain - All Years
11
06-20-2008 11:57 PM
Matt400
3rd Gen High Performance and Accessories (5.9L Only)
24
06-21-2004 03:49 PM
Sittenbull2
3rd Generation Ram - Non Drivetrain - All Years
33
05-14-2004 11:54 PM
grizzly660fan
3rd Generation Ram - Non Drivetrain - All Years
5
03-22-2004 12:12 PM