Dodge Diesel - Diesel Truck Resource Forums

1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

366 and 16 cm

   
Old Apr 27, 2008 | 11:36 PM
Share
  #1  
Confedpirate's Avatar
Confedpirate
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 162
Likes: 0
From: Vancouver WA
366 and 16 cm
This weekend was a good weekend nothing broke. I went meet a member of the board Alwaysworking. He help me install the 366 spring and 16cm on Sat. What a goood day it was for it, now the truck runs good thanks
Reply
0
Old Apr 27, 2008 | 11:43 PM
Share
  #2  
Alwaysworking's Avatar
Alwaysworking
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
bet taking off at lights is alot better now.
Reply
0
Old Apr 27, 2008 | 11:50 PM
Share
  #3  
Confedpirate's Avatar
Confedpirate
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 162
Likes: 0
From: Vancouver WA
i think it scares them when they that muffler start screaming
Reply
0
Old Apr 27, 2008 | 11:51 PM
Share
  #4  
Alwaysworking's Avatar
Alwaysworking
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
not much for a muffler mines quieter than yours, or at least crusing it is
Reply
0
Old Apr 27, 2008 | 11:52 PM
Share
  #5  
Confedpirate's Avatar
Confedpirate
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 162
Likes: 0
From: Vancouver WA
mine looks good, barrow that 545 from the shop
Reply
0
Old Apr 27, 2008 | 11:54 PM
Share
  #6  
Alwaysworking's Avatar
Alwaysworking
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
and put in the 3.07s right?
the truck or the exhaust?
Reply
0
Old Apr 27, 2008 | 11:56 PM
Share
  #7  
Confedpirate's Avatar
Confedpirate
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 162
Likes: 0
From: Vancouver WA
maybe you can find a Gear vendors
Reply
0

Trending Topics

Old Apr 27, 2008 | 11:56 PM
Share
  #8  
Mattster's Avatar
Mattster
Registered User
 
Joined: Aug 2007
Posts: 515
Likes: 1
From: Port Orchard,WA
So now you know how to do and are going to do mine right?
Reply
0
Old Apr 27, 2008 | 11:57 PM
Share
  #9  
Alwaysworking's Avatar
Alwaysworking
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
Originally Posted by Confedpirate
maybe you can find a Gear vendors
got on on the shelf but its sold waiting to be installed
Reply
0
Old Apr 28, 2008 | 12:00 AM
Share
  #10  
Confedpirate's Avatar
Confedpirate
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 162
Likes: 0
From: Vancouver WA
just use for alittle bit i wont tell
Reply
0
Old Apr 28, 2008 | 12:08 AM
Share
  #11  
Alwaysworking's Avatar
Alwaysworking
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
Originally Posted by Mattster
So now you know how to do and are going to do mine right?
sure



i whish i could use it dont fit my t case thought, adapters are expensive
Reply
0
Old Apr 28, 2008 | 12:11 AM
Share
  #12  
Confedpirate's Avatar
Confedpirate
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 162
Likes: 0
From: Vancouver WA
well i guess you better find a 47rh for your truck then you have to worry about the clutch any more
Reply
0
Old Apr 28, 2008 | 12:12 AM
Share
  #13  
Alwaysworking's Avatar
Alwaysworking
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
they still have clutchs, and what fun would that be?
now i can drop into a higher gear and roll some coal.
Reply
0
Old Apr 28, 2008 | 12:22 AM
Share
  #14  
Confedpirate's Avatar
Confedpirate
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 162
Likes: 0
From: Vancouver WA
well i guess you better find a 47rh for your truck then you have to worry about the clutch any more
Reply
0
Old Apr 28, 2008 | 12:28 AM
Share
  #15  
Alwaysworking's Avatar
Alwaysworking
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
i wounder why the cab is quiter now?
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 05:00 PM.