This might be a dumb question, but do you have to prime the fuel system after the install? I looked at the install in the sticky but it didn't mention it.

Thanks

 

I did not have to. Mine fired right up after I got everything together. Looks intimidating from the sticky article, but was actually a fairly straight forward and easy install. Word of advice though, have someone to help you catch the top-hat when you pull the AFC housing off the pump. Mine when flying in a couple of pieces. Of course, looking back if I had been a little more careful I could have gotten it loose all in once piece.

 

Thanks Jeff for the reply and advice

 

I had a friend help me with mine he had done this before. After we got it installed with the fuel pin we took it for a ride and he adjusted the gov. screw setting.

Greg