1st gen pics anyone?
Registered User
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
it was the special kit to put an I/C in a 91.0 non i/c truck, different from the kit to put it in a 89-90 truck....it is a rare peice. my dad sold it to him.
Here´s mine
She´s not a show vehicle, but gets me to Mexico and back. These pics taken about a half hour ago....Sorry for you guys suffering in the cold...about 80 degrees today. Pics taken in Kino Bay Mexico...Què les vayan bien...Mark
Last edited by maybe368; Nov 2, 2009 at 02:43 PM. Reason: Spelling
Thanks, it is actually a warn bumper for a chevy, I cut the ends off so it would fit. I couldn't find one reasonably priced for a Dodge. As I recall a new one for a Dodge was over 1000 dollars and I just couldn't find any used ones for a Dodge. It must be because you guys keep these great trunks on the road and when one does go belly up, it's parts get reabsorbed into other Dodges so fast that you have to be one of the first to get to it...
I called about 10 local wrecking yards and could not find one truck that had not already been stripped of it's usable parts...Mark
I called about 10 local wrecking yards and could not find one truck that had not already been stripped of it's usable parts...Mark
Here's a couple more pics
I thought I would post a couple more pics of some of the changes I made to the truck. The original bench seat was going to cripple me, so I installed this one, It is actually a generic seat that is flat all the way across the bottom. The difference is the mounting is for a Dodge. The toolbox/fuel tank is 91 gallons and I built a stand for is so that I would not completely lose my bed.It gives me around 2500 miles between fillups
..Mark
..Mark


