Well auto to manual swap is done now time to add some power going to upgrade the turbo first since the stock turbo lags so bad going to get the 60 mm wheel up grade but don't know what exhaust housing to get any thoughts or suggestions

 

With a manual use a 12 or 14 or put on a 351cw, gets you both the 60mm and small housing in one.

 

x2 on the 12, better and cheaper to get,

 

The 14 may be a really good balance between low end power and high end punch, but the 16 is a complete beast with a 60mm the mid and upper ranges.

 

The 14cm on my Super 40/35 hybrid spools great! Not too choked out up top and good on the bottom. Although, the 12cm is cheaper.

 

What would the 12 due to egts when pulling

 

When i went GDS 60MM i also installed a gated 14CM BD exhaust housing. It spools fast and cools really well, EGT's are cooler then with stock compressor and 18.5 housing.