Xfer case shift lever question
Thread Starter
Registered User
Joined: Nov 2008
Posts: 95
Likes: 0
From: Mineral Co. WV.
Xfer case shift lever question
I have a queston on the later model shift levers for the transfer case.
I am going to put a 2000 model cab on my 95. After reading about the problems doing an auto to 5spd swap using a newer trans. I need/want to use a newer style floor mount xfer shifter.
I am wonderng if I can use one from a 1/2 ton truck.
Are they the same as for the 3/4 and ton trucks? Or do I have to find one from a diesel?
Also how are they attached to the xfer case as far as shifting mechanism?
Cable or rod?
Thanks.
Also, is there a tutorial on posting pictures?
I am going to take a lot during this change over.
Would like to share some, maybe benefit others considering similar swaps.
I am going to put a 2000 model cab on my 95. After reading about the problems doing an auto to 5spd swap using a newer trans. I need/want to use a newer style floor mount xfer shifter.
I am wonderng if I can use one from a 1/2 ton truck.
Are they the same as for the 3/4 and ton trucks? Or do I have to find one from a diesel?
Also how are they attached to the xfer case as far as shifting mechanism?
Cable or rod?
Thanks.
Also, is there a tutorial on posting pictures?
I am going to take a lot during this change over.
Would like to share some, maybe benefit others considering similar swaps.
Thread
Thread Starter
Forum
Replies
Last Post
bucknasty
3rd Generation Ram - Non Drivetrain - All Years
8
Feb 2, 2009 08:46 AM
guidster
3rd Gen Engine and Drivetrain -> 2003-2007
8
Jun 6, 2005 11:16 AM
