I have been reading over and over and still am having a hard time deciding on what turbo to get... I have a 98 12V with 3600 gsk, afc, 0 fuel plate, 60lb valve springs and Bosch 370 injectors 5" Stack... I want to lower my EGTs and keep some of the drive ability with it. I was looking at the Aurora 2000.

Thanks
Chris

 

https://www.dieseltruckresource.com/...ad.php?t=82141

Good thread on differences between the models.

All depends on what you want to do, looks like you plan to do a little pulling? From my exposure, everything is going to be a compromise to a degree. The larger turbos require more fuel and typically are more laggy on the bottom end. It seems the general consensus is a 62/14 setup is the best compromise. Just about any turbo you buy is going to be better in the EGT dept. than your stock HX-35. Remember, its just my opinion as a fellow windmill researcher.