Well, it finally happened
Thread Starter
Registered User
Joined: Dec 2009
Posts: 36
Likes: 0
Well, it finally happened
...5th gear nut, that is 
I was pulling my trailer down to a race when it happened, just kicked out on level ground with the cruise control on. Truck has 215k on it - I just figure that's a worthwhile data point for anybody else. I've put about 55k on it - no clue how the previous owner drove. I've been careful not to lug it in 5th & all that, but from what I have read, its bound to happen at some point.
I was planning on getting the trans rebuilt this winter, but don't have the cash (or time) to do it right now. I know all the 5th gear nut 'fixes' are more of a band-aid than a solution, but of all of them - which one do you guys think is the best? I was pretty disappointed to see that quad4x4 isn't making their mainshaft kits anymore, guess I will have to pick my transmission guy's brain about the best way to prevent it when it gets rebuilt.
May 12th is pretty much my first (only!) free day for a while, so I am hoping to get this done then. Doesn't look like its really *that* bad to pull the t-case, 5th gear housing, and do any of the 5th gear fixes.
I was pulling my trailer down to a race when it happened, just kicked out on level ground with the cruise control on. Truck has 215k on it - I just figure that's a worthwhile data point for anybody else. I've put about 55k on it - no clue how the previous owner drove. I've been careful not to lug it in 5th & all that, but from what I have read, its bound to happen at some point.
I was planning on getting the trans rebuilt this winter, but don't have the cash (or time) to do it right now. I know all the 5th gear nut 'fixes' are more of a band-aid than a solution, but of all of them - which one do you guys think is the best? I was pretty disappointed to see that quad4x4 isn't making their mainshaft kits anymore, guess I will have to pick my transmission guy's brain about the best way to prevent it when it gets rebuilt.
May 12th is pretty much my first (only!) free day for a while, so I am hoping to get this done then. Doesn't look like its really *that* bad to pull the t-case, 5th gear housing, and do any of the 5th gear fixes.
Administrator
Joined: Jan 2007
Posts: 8,372
Likes: 172
From: Streator Illinois
...5th gear nut, that is
I was pulling my trailer down to a race when it happened, just kicked out on level ground with the cruise control on. Truck has 215k on it - I just figure that's a worthwhile data point for anybody else. I've put about 55k on it - no clue how the previous owner drove. I've been careful not to lug it in 5th & all that, but from what I have read, its bound to happen at some point.
I was planning on getting the trans rebuilt this winter, but don't have the cash (or time) to do it right now. I know all the 5th gear nut 'fixes' are more of a band-aid than a solution, but of all of them - which one do you guys think is the best? I was pretty disappointed to see that quad4x4 isn't making their mainshaft kits anymore, guess I will have to pick my transmission guy's brain about the best way to prevent it when it gets rebuilt.
May 12th is pretty much my first (only!) free day for a while, so I am hoping to get this done then. Doesn't look like its really *that* bad to pull the t-case, 5th gear housing, and do any of the 5th gear fixes.
I was pulling my trailer down to a race when it happened, just kicked out on level ground with the cruise control on. Truck has 215k on it - I just figure that's a worthwhile data point for anybody else. I've put about 55k on it - no clue how the previous owner drove. I've been careful not to lug it in 5th & all that, but from what I have read, its bound to happen at some point.
I was planning on getting the trans rebuilt this winter, but don't have the cash (or time) to do it right now. I know all the 5th gear nut 'fixes' are more of a band-aid than a solution, but of all of them - which one do you guys think is the best? I was pretty disappointed to see that quad4x4 isn't making their mainshaft kits anymore, guess I will have to pick my transmission guy's brain about the best way to prevent it when it gets rebuilt.
May 12th is pretty much my first (only!) free day for a while, so I am hoping to get this done then. Doesn't look like its really *that* bad to pull the t-case, 5th gear housing, and do any of the 5th gear fixes.
No way it is coming loose short of total carnage, and it could be reused on your rebuild.
Registered User
Joined: Dec 2003
Posts: 14,672
Likes: 9
From: Montana
I was pretty disappointed to see that quad4x4 isn't making their mainshaft kits anymore
It's the only way to go for a permanent fix.
Thread
Thread Starter
Forum
Replies
Last Post
BMH95
3rd Gen Engine and Drivetrain -> 2003-2007
15
Feb 23, 2009 09:01 AM
Hopper
3rd Generation Ram - Non Drivetrain - All Years
15
Feb 16, 2008 03:37 PM
kev94mx
3rd Gen Engine and Drivetrain -> 2003-2007
67
May 26, 2007 10:18 PM
