12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

recommend a front end rebuilder in South Cal,San Berdo area?

Old Feb 22, 2010 | 05:07 PM
  #1  
spuds's Avatar
Thread Starter
Registered User
 
Joined: Feb 2009
Posts: 18
Likes: 0
recommend a front end rebuilder in South Cal,San Berdo area?

Yep,need front end rebuilt NOW.Doesnt have to be a 6000 dollar be all and end all,just a competent front end job.

Anyone in SoCal have a garage for me to go to with good service?
Reply
Old Feb 24, 2010 | 05:42 PM
  #2  
Dan Turner's Avatar
Registered User
 
Joined: Feb 2006
Posts: 63
Likes: 0
Try Bucky at O&R offroad in Rialto. Old guy that does great work.

-Dan
Reply
Old Feb 25, 2010 | 10:08 PM
  #3  
jtamulonis's Avatar
Registered User
15 Year Member
 
Joined: Apr 2009
Posts: 184
Likes: 29
From: Banning, ca same house 73yrs
Originally Posted by Dan Turner
Try Bucky at O&R offroad in Rialto. Old guy that does great work.

-Dan
I`ve been doing business with Bucky since the late `70s. you`ll be pleased with the quality of his work, and always a fair price. 909 877 5045. tell him Butch recomended him.
Reply
Old Feb 26, 2010 | 03:17 PM
  #4  
spuds's Avatar
Thread Starter
Registered User
 
Joined: Feb 2009
Posts: 18
Likes: 0
Does bucky do the DT trackbar? I will call right now,thanks!!!!

they said call gemini in Colton 909-825-6565.

They said a DT bar with rebuild is NO problem!
Reply
Old Feb 26, 2010 | 10:36 PM
  #5  
royta's Avatar
Registered User
 
Joined: Jun 2004
Posts: 619
Likes: 1
From: Morgan County, Utah
All Four Wheel Drive
21765 Temescal Canyon Rd
Corona, CA 92883-4975
(951) 277-1037


I know it would be a little bit of a drive, but you should really call him up. He works on a ton of Jeeps, and I had him work on my old '97 a few different times when I lived in Corona. One of those times was for the ball joints.
Reply
Old Mar 16, 2010 | 03:16 PM
  #6  
spuds's Avatar
Thread Starter
Registered User
 
Joined: Feb 2009
Posts: 18
Likes: 0
OK,went with Jim-N-I (Gemini,lol,got that wrong)

Install trackbar,upper and lower trailing arm bushings,and gear box replace and align,1072.00

Im happy with price,I liked the guy,goes into shop in morning.Really did a nice inspection,said trailing arm bushings werent loose but cracked and I said go ahead and replace.My thinking if its questionable at all,replace it.Steering gear bearing at pitman arm was total slop.

So thats the upshot on that.Thanks for the help folks,really appreciate it!
Reply
Old Mar 16, 2010 | 03:18 PM
  #7  
spuds's Avatar
Thread Starter
Registered User
 
Joined: Feb 2009
Posts: 18
Likes: 0
JT,Bucky said he knew you BTW.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
b4black
12 Valve Engine and Drivetrain
2
Feb 3, 2012 06:44 PM
davegonz
1st Gen. Ram - All Topics
1
Nov 9, 2007 01:16 PM
Rambunctious1
Competition / Pulls / OffRoad
6
Apr 11, 2007 12:48 AM
mucknet
General Diesel Discussion
3
Jul 18, 2005 11:23 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:56 PM.