12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

Part numbers for a complete exhaust

Old Mar 1, 2007 | 01:25 PM
  #1  
Iron City's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 127
Likes: 0
From: Pittsburgh, PA
Part numbers for a complete exhaust

I'm looking for an inexpensive exhaust including the cat (I think in PA I need to keep the cat to pass inspection). Has anyone sourced an exhaust from the downpipe out including cat and muffler from NAPA or another place? Thanks.
Reply
Old Mar 1, 2007 | 03:58 PM
  #2  
JKM's Avatar
JKM
Registered User
 
Joined: Jun 2004
Posts: 1,668
Likes: 0
From: SunnyVale Trailer Park
You can buy a complete stock exhaust , But I think you would be farther ahead to buy a 4" system , and get a cat from someone with a 3rd gen who pulled theirs off and is going to throw it out, the truck will breath much much better

FWIW , It is illegal to remove a cat , but as long as you can pass emissions inspection (If your state has one) then It usually is not enforced.
Reply
Old Mar 1, 2007 | 04:19 PM
  #3  
Valv's Avatar
Registered User
 
Joined: Mar 2005
Posts: 1,376
Likes: 1
From: North Carolina
I wish you were closer I would just give mine to you. I have a complete exhaust in good conditions, with cat, muffler and downpipe

It will go to the landfill.
Reply
Old Mar 9, 2007 | 10:35 AM
  #4  
Iron City's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 127
Likes: 0
From: Pittsburgh, PA
thanks for the help guys.

I hear you Valv, it would be great to get a hold of yours but the logistics can't be worked out!
Reply
Old Mar 9, 2007 | 08:00 PM
  #5  
Hammily's Avatar
Registered User
 
Joined: Nov 2005
Posts: 222
Likes: 0
From: Manitoba, Canada
This is the cheapest one that I have found.

http://www.rpmoutlet.com/dodgep.htm

John
Reply
Old Mar 9, 2007 | 09:21 PM
  #6  
cmax's Avatar
Registered User
 
Joined: Feb 2007
Posts: 27
Likes: 0
From: Flagstaff, AZ
I just bought a full system from Summit Racing, 4 inch from the turbo back. $293 + 20 shipping. Kit included everything and was very easy to install.
Reply
Old Mar 21, 2007 | 03:42 PM
  #7  
Iron City's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 127
Likes: 0
From: Pittsburgh, PA
cmax, any chance you could send a part number, I'm looking on summit website but can't seem to find what you bought. Thanks!

EDIT: never mind, just found it SUM-680001

did you need to buy new hangers or any other hardware?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mulepackin
Performance and Accessories 2nd gen only
6
Jul 16, 2010 02:49 PM
sCreamin400
3rd Gen High Performance and Accessories (5.9L Only)
1
Nov 2, 2008 01:46 PM
Ace
1st Gen. Ram - All Topics
2
May 9, 2007 06:41 PM
smoky beast
1st Gen. Ram - All Topics
2
Sep 25, 2006 11:17 PM
zylberberg
Towing and Hauling / RV
4
Jul 30, 2006 08:40 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:29 AM.