Harder to start after timing advance?
Registered User
Joined: Mar 2004
Posts: 4,767
Likes: 5
From: port crane, NY
''Isn't that only on the first gen VE pumped trucks? I thought the P7100s were timed using a different method?''
That is correct. We rotate the whole pump relative to the engine with a 1st gen--the pump drive gear has a keyway and only goes on one way. P-pumps do NOT move relative to the engine. Rather, the pump drive gear is pressed onto the shaft of the pump which has a taper to it. Little bit more trickey than the ole 've
g
That is correct. We rotate the whole pump relative to the engine with a 1st gen--the pump drive gear has a keyway and only goes on one way. P-pumps do NOT move relative to the engine. Rather, the pump drive gear is pressed onto the shaft of the pump which has a taper to it. Little bit more trickey than the ole 've
g
Thread
Thread Starter
Forum
Replies
Last Post