12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

'96 ?'s

Thread Tools
 
Search this Thread
 
Old Mar 16, 2010 | 03:03 PM
  #1  
DragonSlayer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2008
Posts: 385
Likes: 4
From: Pensacola, Fl
Talking '96 ?'s

I may have the chance to buy my friends '96 reg cab 2wd. Truck has damage to right side from trailer, but said he'll take $1500 for it. If he sells, I'll have some questions for ya. I should know something by this weekend.
Reply
Old Mar 16, 2010 | 04:30 PM
  #2  
lgp9999's Avatar
Registered User
 
Joined: Jul 2006
Posts: 595
Likes: 2
From: Vancouver, WA
Sounds like a great deal if it's even in half way decent mechanic condition. You could get double that just for the engine by itself!
Reply
Old Mar 16, 2010 | 06:13 PM
  #3  
DragonSlayer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2008
Posts: 385
Likes: 4
From: Pensacola, Fl
That was my thoughts, he drives it everyday, the only thing wrong as far as I know, is he got hit from behind while pulling a gooseneck trailer, and that caused it to hit the right bed side and door.
Reply
Old Mar 16, 2010 | 06:55 PM
  #4  
Clayten's Avatar
DTR's Toad Wrangler
 
Joined: May 2005
Posts: 892
Likes: 0
From: N 48 25.707 W123 21.887
$1500. If you buy it plan on going to jail for theft.
Reply
Old Mar 16, 2010 | 09:29 PM
  #5  
BLACKDRAGON's Avatar
Registered User
 
Joined: Oct 2004
Posts: 34
Likes: 0
From: South dakota
Originally Posted by Clayten
$1500. If you buy it plan on going to jail for theft.
I agree.
Reply
Old Mar 17, 2010 | 08:19 AM
  #6  
patdaly's Avatar
Administrator
 
Joined: Jan 2007
Posts: 8,372
Likes: 172
From: Streator Illinois
Grrr, why do I never run into these deals?
Reply
Old Mar 17, 2010 | 12:12 PM
  #7  
DragonSlayer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2008
Posts: 385
Likes: 4
From: Pensacola, Fl
Believe me, if this happens it'll be a first for me!
Reply
Old Mar 28, 2010 | 09:43 PM
  #8  
DragonSlayer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2008
Posts: 385
Likes: 4
From: Pensacola, Fl
Well it happened! I just pulled that baby up in the driveway! I was wrong about the right side damage, it was left side, gonna prolly take a bed, and needs some front end work. It pulls to the right, and has a 'clunk' when it comes to a stop. Oh, and no low beams...I have not looked at or checked anything, just paid the man and drove it home.
Reply
Old Mar 29, 2010 | 03:34 PM
  #9  
G1625S's Avatar
Registered User
 
Joined: Mar 2004
Posts: 4,767
Likes: 5
From: port crane, NY
Good deal 5 speed?
Reply
Old Mar 29, 2010 | 09:19 PM
  #10  
DragonSlayer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2008
Posts: 385
Likes: 4
From: Pensacola, Fl
Originally Posted by G1625S
Good deal 5 speed?
No, it's an auto. It has SLT trim, 2wd, and cloth seats. I think I found a bed, going to check tomorrow, then start fixin the ol girl up. I'm excited about the 12 valve, Ill start some tuning after I get the front end stuff done.
Reply
Old Mar 30, 2010 | 09:59 PM
  #11  
DragonSlayer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2008
Posts: 385
Likes: 4
From: Pensacola, Fl
Just got home from scoring a good bed for cheap! I'll swap that this weekend since mine is crushed on the left side, top of the bed is on the inner fender hump!
Reply
Old Mar 31, 2010 | 01:35 AM
  #12  
Astro's Avatar
Registered User
 
Joined: Jun 2009
Posts: 85
Likes: 1
From: Texas
Killer deal man!
Reply
Old Apr 1, 2010 | 09:07 PM
  #13  
DragonSlayer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2008
Posts: 385
Likes: 4
From: Pensacola, Fl
Got the bed off today, get the other bed on 2moro or Sat. Found ans fixed the clunk in the front end, loose bolts on upper right control arm. Tightened them up and ggod to go!
Reply
Old Apr 2, 2010 | 02:23 PM
  #14  
justme-'s Avatar
Registered User
 
Joined: Oct 2005
Posts: 589
Likes: 0
From: Central MA
man did you get that for a song!! nice job!
Reply




All times are GMT -5. The time now is 09:20 AM.