Dodge Ram Limousine...
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Nevada
Posts: 2,615
Likes: 0
Received 0 Likes
on
0 Posts
Dodge Ram Limousine...
#4
Registered User
Only for two of them! Still got the same crappy back bench, a tear in the drivers seat, and those pics show the front seats at least most of the way forward! Cool but would only be worth the money if you had a 6ft bed with the same wheelbase and made the cab (even) longer. Cool though!
#6
There is no G. There is no G. Repeat after me, THERE IS NO G!
#7
Registered User
All that work to leave six inches between the front seat (slid clear forward) and the middle seats, then another six inches between the middle seats and the (yes, very crappy stock) rear bench, and then just those dinky little suicide rear doors to boot.
Some people just can't plan anything out.
Some people just can't plan anything out.
Trending Topics
#8
Registered User
Join Date: Aug 2002
Location: Sundre, Alberta
Posts: 1,257
Likes: 0
Received 0 Likes
on
0 Posts
Just going by the pictures, if you could pick this up at a decent price, it wouldn't take much to make it right.
The question is what is actually underneath what they are showing?
Going by the shoddy trim work on some of the interior pieces, and some missing side to side, you have to wonder what short cuts were done on the mechanical end of this rig....welding/frame extension comes to mind right away.
Great concept, poor execution.
Jeff
The question is what is actually underneath what they are showing?
Going by the shoddy trim work on some of the interior pieces, and some missing side to side, you have to wonder what short cuts were done on the mechanical end of this rig....welding/frame extension comes to mind right away.
Great concept, poor execution.
Jeff
#10
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
UnrulyNFS
Performance and Accessories 2nd gen only
28
06-20-2005 09:12 PM