im planning on installing a J-Hook & Boost fooler on my truck in the next few months. there are several different versions out on the market.

B&D X- Hook
TST J hook
and a few others.... what are you guys running, and do i have to worry about adjusting my J hook?

if someone could post links i would App it!

also is everyone runing Quadzilla's boost fooler, or what other options do i have?

 

I run the TST, have hit 33psi of boost. Easy to install and really like it. All of the programmers have a boost fooler built in. I have an Edge Juice with attitude.

 

do you have to worry about adjusting your boost pressure or anything?

 

It is all regulated by the spring pressure.

 

+1 on the TST - used to be a lot cheaper than the BD one too but I think they are close in price now.

 

with the TST did you ever have to worry about over boost, or going over 35 PSI

 

No. Only had mine to 33 on level 6-5 on Juice with Attitude.

 

i think im going to buy the TST one, it just looks more stout!

i was worried about it because you cant adjust it, unlike the other J-hook...

im only hoping/trying to get 28-30 PSI of boost!

 

You could just get a turnbuckle from lowes or HD and prob save some $.

 

ya im just afraid of getting to much boost and overspooling my turbo

 

If you have the HX-35...I wouldn't worry about it. W/my setup it has never been an issue. You could even install the turn buckle solid on one end and spring on the other.

 

Hy35

 

I'd still proceed w/doing it. Think about finding a used HX....it would bolt right on.

 

With the TST I can very rarely hit 35lbs w/Edge and DD1 injectors - and I never worry about. I had the turnbuckle and easily reach 40psi all the time so I went to the j-hook instead as it was my daily driver and I didn't want to grenade the turbo. You'll be fine with the j-hook.