external voltage regulator on cummins??
10-19-2006, 01:46 PM
#2
Registered User
Yes, this refers to 1st gen but works the same on all years
https://www.dieseltruckresource.com/...n&onlynewfaq=1
https://www.dieseltruckresource.com/...n&onlynewfaq=1
10-19-2006, 06:41 PM
#4
Registered User
I had it in my gallery but now it's gone. I resubmitted it and will post it tomorrow after it's approved or you can PM me your email address and I'll send it to you.
10-20-2006, 09:44 AM
#5
Registered User
It's very simple.
What's important is that the switched positive is at the top of triangle, the other two terminals that go to the alt can be traded. The stock wires have to be disconnected and taped. Use a good ground.
Any 12v regulator will work, all have the same triangular plug setup.
What's important is that the switched positive is at the top of triangle, the other two terminals that go to the alt can be traded. The stock wires have to be disconnected and taped. Use a good ground.
Any 12v regulator will work, all have the same triangular plug setup.
Thread
Thread Starter
Forum
Replies
Last Post
flycl65
12 Valve Engine and Drivetrain
4
01-26-2006 12:00 AM
banks twinram
Performance and Accessories 2nd gen only
5
05-01-2005 10:35 PM