Where's the manual's??????
#1
Registered User
Thread Starter
Where's the manual's??????
I would like to rebuild my own sandin a/c comp., i'v been looking but can't find a book or video to show me how!!!! Anyone help me out?????? It's a 91.5 d250
#2
Administrator
I have never known anyone that has rebuilt an ac compressor. Of course, that doesn't mean that there aren't any, but I don't think that it is very common...Mark
#4
Registered User
Thread Starter
My desire is more for cuorisity, such as why it broke or quit working, i'm sure i will buy a NEW comp., but then....... i am curious. THANKS MARK i'm checking out " THIS"
#5
Administrator
#6
Registered User
Thread Starter
Yea, this is a sandin ,,,,, it looks small& doable, don't think it has too many parts. I keep seeing rebuild kits but no rebuild books.If i decide to tackle it ,,,,i'll do the pics. and post the results.
#7
Registered User
I would NEVER buy something I could rebuild for less, however, at the time it was a no brainer.
Trending Topics
#9
Registered User
Join Date: Mar 2011
Location: Palo Cedro, CA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
If it's not working, and you are sure it's the compressor that's bad, I say take it apart.
It will either make sense, or it won't. Could be you just need a valve and a couple of seals.
I do have to admit however, I still have the compressor kit sitting in my garage for my first gen 4-runner (bought kit 4 years ago)
It will either make sense, or it won't. Could be you just need a valve and a couple of seals.
I do have to admit however, I still have the compressor kit sitting in my garage for my first gen 4-runner (bought kit 4 years ago)
#10
Registered User
Thread Starter
Joey--- the comp., still runs but after blow'n out ,flush'n out & pullin vacum TWICE( that would be 2 times -----right?) , the low side won't go down, & high side won't go up ,,,,,,replace or rebuild----i got'a know. if your kit will fit a sandin comp., -----welllllll now !!!!!
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto
0
07-26-2013 09:30 AM
ezdemon72
12 Valve Engine and Drivetrain
14
07-29-2005 10:05 AM