Tranny leak at inspection plate.....
#1
Registered User
Thread Starter
Join Date: Apr 2006
Location: Fontana, CA
Posts: 5,776
Likes: 0
Received 0 Likes
on
0 Posts
Tranny leak at inspection plate.....
My 48re is slowly dripping tranny fluid from the inspection plate. I pulled the plate and there is a tiny bit of fluid in there. This isn't normal, right? What could be the cause? Leaking seal or something?
#2
Registered User
Mines doing the same thing as well, I'm thinking the torque converter seal is leaking. Just got done doing my front crank seal, next is my rear main seal and converter seal. I got 110000 on the truck.
#4
Registered User
Join Date: Dec 2007
Location: North Carolina or Kentucky. Take your pick
Posts: 2,738
Received 0 Likes
on
0 Posts
An occasional drip is not a leak. Lots of these units show some wetness in indiacted area. Could be oil getting past vent, seep to lube the sipes on hub seal, and more.
Thread
Thread Starter
Forum
Replies
Last Post
btoops
3rd Gen Engine and Drivetrain -> 2003-2007
1
08-13-2011 02:24 PM
Nate-03 D
3rd Gen Engine and Drivetrain -> 2003-2007
4
07-19-2011 06:08 PM
ArXane
3rd Gen Engine and Drivetrain -> 2003-2007
14
04-18-2009 08:50 PM