No start...04.5 2500
#1
Registered User
Thread Starter
Join Date: Nov 2005
Location: montville,nj
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
No start...04.5 2500
So if some have not seen my other thread, the entire frame on my truck has been replaced due to me hitting a phone pole. Shop has the truck 95% finished except for replacing one of my brake calipers which broke during the change over. They said they had the truck running and had to move it around to put the fenders, hood, etc.. on and now the truck won't start back up. Fass pump turns on, all interior lights come on, but the gauges don't move and the truck won't start. I do have an alarm on the truck, but I turned it off before the shop took the truck.
Any thoughts on what it could be? All fuses have been checked and are apparently good. (I did not check them) Maybe because there is no brake fluid in the truck, it won't start? Any suggestions will be much appreciated. As soon as they fix the caliper and get her started, I get it back!!
Any thoughts on what it could be? All fuses have been checked and are apparently good. (I did not check them) Maybe because there is no brake fluid in the truck, it won't start? Any suggestions will be much appreciated. As soon as they fix the caliper and get her started, I get it back!!
#3
Registered User
Thread Starter
Join Date: Nov 2005
Location: montville,nj
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
Won't turn over and no codes at all. Turn the key and nothing. All lights come on, gauges don't move, and nothing. Funny thing is they had it running to move it and now it won't start.
Thread
Thread Starter
Forum
Replies
Last Post
Hunky Dory
24 Valve Engine and Drivetrain
6
05-13-2013 08:09 PM
CoolumConst
3rd Gen High Performance and Accessories (5.9L Only)
9
10-11-2008 10:00 PM
ALEX516
2nd Gen. Dodge Ram - No Drivetrain
8
09-15-2005 09:14 PM
Bigredmachine
3rd Generation Ram - Non Drivetrain - All Years
3
06-24-2004 12:36 AM
03CTDCO
3rd Generation Ram - Non Drivetrain - All Years
1
11-18-2003 08:11 PM