Move fuel plate fwd?
#1
Registered User
Thread Starter
Join Date: Feb 2007
Location: San Juan Islands
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Move fuel plate fwd?
I would like to move my stock fuel plate forward on my 96 12v but was hoping to find a good link with instructions and maybe a pic or two before starting. Do I just need a exhaust temp gauge? where would I buy a #10 plate and 3k gsk kits? thanks
#2
http://www.tstproducts.com/INSRUCT98.pdf
there are some directions, also they sell a variety of plates. Or you could do as I did and many others do and grind your stock plate into a "100 plate" do a search for that topic and you will find some more info.
there are some directions, also they sell a variety of plates. Or you could do as I did and many others do and grind your stock plate into a "100 plate" do a search for that topic and you will find some more info.
#3
Do it
Buy the #10 and GSK3000 and youll swear its a new truck! EGTS stay low enough gauges are not needed, but advised. That setup will shutter a trans though so but the ATS valve body kit. Got 190,000 and still shifts strong. I can shudder it but learn how to drive the thing and itll be fine. Go to
http://www.piersdiesel.com/DodgeUSPrice.htm
http://www.piersdiesel.com/DodgeUSPrice.htm
Thread
Thread Starter
Forum
Replies
Last Post
TurboCrisco
Performance and Accessories 2nd gen only
6
01-15-2007 09:23 PM