Maryland Chapter #33 Never ending thread V

[scottsjeeprolet]

Well here is the next installment in the never ending thread.
Who's coming Friday night and or Saturday. Great weather for a bonfire.[coffee]

[Sea:\>Drive]

I've got some stuff to do around the house (unpack the boat and take it in for winterization), but I should be over on Saturday.

[getblown5.9]

ill be hanging in a tree til at least 11am saturday then i may be able to swing over. shall i bring my bow with me, just in case the big one happens to come chasing a doe past the garage [laugh]

no work to do on my truck for once, tho im getting kinda crazy and wanting to know if my tires will still clear if i remove the leveling kit...gotta drop the the front end so it pulls a little better [duhhh]

[skynyrd]

it should clear TJ i don't see why it wouldn't heck the 3rd gens can pretty much almost clear 35's stock.

[getblown5.9]

i have those offset wheels, i think the tire will rub the inner fender when i turn

[paroxysym]

i might stop over saturday... dont have anything going on as far as i know..

[JonnyThrottle]

no more "bouncy and fun" avatar paroxysym? [roll]

[scottsjeeprolet]

anyone available to help move a wood stove tonight? It's only 200#, pretty light. Call me if you can help.
thanks again.

[TKC2000]

Well here is the next installment in the never ending thread.
Who's coming Friday night and or Saturday. Great weather for a bonfire.[coffee]

what day you want to do the bonfire?[roll] I need to check the calander, I know something is going down this weekend just can't remember what.[duhhh]

[biggerkin]

El' Presidenta' Call me have three prospective buyers. Check your pm. Call me at the house!!

[06 DIESEL]

I will be there for both as long as I do not have to work saturday. It sounds like I might need to make two pots of chili to feed everyone.

[biggerkin]

Does everybody want the wife to make TACO DIP again???[coffee][coffee]I'll be doing the drinkin for my B-day..LOLOLOLOLOL[coffee][coffee]

[06 DIESEL]

Does everybody want the wife to make TACO DIP again???[coffee][coffee]I'll be doing the drinkin for my B-day..LOLOLOLOLOL[coffee][coffee]

YES

My brother just got a offer to buy his truck so he is looking for a first or second gen, quad cab, perferably a long bed, must be a MANUAL (no auto, he is hard on those[duhhh]) transmission, 4X4. If you know of anyone that is selling one please let me know so I can pass it on to him. The buyer is very, very motivated to purchase his truck, actually offered him about 5k over what he paid for it, so he said the only way he is selling it is if he finds a CTD that fits these requirements.

[bootsdodgejn]

hey what i all nedd to put my gauges in this Sat (wires,connectors,fittings..etc)

[BigErksG2]

anyone interested in a set of 4 33x12.50 tires mounted on 16.5" chrome rims? The rims retail for $379 a piece and the tires have about 3k miles on them. Its the rim and tire combo that came with my truck but it was replaced with hummer rims and BFG'S. PM me with an email if youre interested. Figure i would offer them to you guys before i put them on the site.

[JonnyThrottle]

hey what i all nedd to put my gauges in this Sat (wires,connectors,fittings..etc)

what gauges are you putting in? what company? digital or mechanical? if you are putting in
-EGT probe you need a drill and a GOOD tap set for the exhaust manifold
-for fuel pressure i used a banjo bolt off the fuel return from the VP44
-tranny temp/pressure runs off of test ports on the passenger side of the tranny, 1/4 pipe threads i believe. (unless you run one in a line coolant line)
- for boost, i run mine off a fuse, but if yours is mechanical, you will need to drill and tap your intake horn. BUT MAKE SURE YOU TAKE IT OFF!! you dont want metal shavings in your engine. The exhaust manifold really doesnt need to be taken off if you are careful, but the air horn should be taken off IMO to ensure NO accidents

and this is assuming you have all piping and fitting that came with the gauges and assuming they all fit where they are supposed to

[bootsdodgejn]

I have a boost,tranny,egt. There auto meter PHANTOM's

[scottsjeeprolet]

what gauges are you putting in? what company? digital or mechanical? if you are putting in
-EGT probe you need a drill and a GOOD tap set for the exhaust manifold
Have all that in the Cave, We've done lots of them!
-for fuel pressure i used a banjo bolt off the fuel return from the VP44
-tranny temp/pressure runs off of test ports on the passenger side of the tranny, 1/4 pipe threads i believe. (unless you run one in a line coolant line)
Bad idea, you should read off the trans cooler line straight out of the trans, reading at the test ports gives you inaccurate readings(only reading in that gear, 1st gear port, 2nd gear port you get the idea.
- for boost, i run mine off a fuse, but if yours is mechanical, you will need to drill and tap your intake horn. BUT MAKE SURE YOU TAKE IT OFF!! you dont want metal shavings in your engine.
Just use a Boost Bolt, i have an extra in the Cave
The exhaust manifold really doesnt need to be taken off if you are careful, but the air horn should be taken off IMO to ensure NO accidents

and this is assuming you have all piping and fitting that came with the gauges and assuming they all fit where they are supposed to
Boots are they new gauges or used, what fittings do you have?

Have you joined the chapter yet? If not email the below address and we will get you all signed up.

[bootsdodgejn]

there barly used, i have the egt probe, boost tubing and fittings, but i dont have any thing for the tranny. Just a heads up im planning on putting them on my dash sepertly right above the radio

Sent and email

[getblown5.9]

YES

My brother just got a offer to buy his truck so he is looking for a first or second gen, quad cab, perferably a long bed, must be a MANUAL (no auto, he is hard on those[duhhh]) transmission, 4X4. If you know of anyone that is selling one please let me know so I can pass it on to him. The buyer is very, very motivated to purchase his truck, actually offered him about 5k over what he paid for it, so he said the only way he is selling it is if he finds a CTD that fits these requirements.

this is a STEAL travis...your brother buys this and he will have a very sweet truck for $4k less than what they are selling for now

http://www.dieseltruckresource.com/classifieds/showproduct.php?product=14296

[06 DIESEL]

this is a STEAL travis...your brother buys this and he will have a very sweet truck for $4k less than what they are selling for now

http://www.dieseltruckresource.com/classifieds/showproduct.php?product=14296

Thanks TJ, I just e-mailed him the link.

[paroxysym]

no more "bouncy and fun" avatar paroxysym? [roll]

nope only on jeep forums. [laugh]

[ruquik]

Does everybody want the wife to make TACO DIP again???


YES,YES,YES,YES,YES,YES,YES,

[ruquik]

Can I bring the my other Dodge on the trailer to get the T-case looked at/fixed?

I can be there both days.

[getblown5.9]

alright, i am bringing 4 tires that need to be burned off...and caught on video...so at some point saturday we will be taking a ride to a back road somewhere to get some film!!!!

then we can burn the old tires, they put off alot of light, heat and smoke in a bon fire HAHA, j/k dont want the FD to show up at scotts

[TKC2000]

Hey Scott, can I park the 5th in the drive way again? If so, I'll be there Fri. night and Sat. It may just be me by my lonesome or Krysten may com along, don't know about that yet. Cindy has some presentation/lecture to give Sat. so she won't be attending. I got plenty of barley pops left over from the Mason Dixon Dyno event. [coffee][coffee]

[Sea:\>Drive]

Go ahead and bring Krysten, it'll give my girls someone to play with while they are there. I'm sure the wife and kids will be coming with me on Saturday.

Scotte: my girls said that goofy guy that squirts the glowing stuff on everyone needs to be there too!!! (speaking of Glenn, does he have a login here yet?).

[robmints]

I'm going to miss you guys but I need to dig my poop pipes out of the ground and replumb the septic. I have a brand new 1/8-27 I can drop by thurs or fri. Meant to leave it there but forgot. Who ever is helping Boots just let me know and I'll bring it over. I usually drill with a T drill and tap 2/3rds the depth of the tap. I love taco dip with Frito's, what a week for the septic pipes to go?

[scottsjeeprolet]

Ok so lets wait a minute, Jeannine won't be home Sat so i wasn't on planning on an all out party, just a wrenchin day with the guys & then a bonfire.[coffee]
Nothing spectacular.
Brad you can bring your truck and we will just drop the t case right on your trailer. that way if you need parts you can still get the truck home.
Todd you can bring your camper but bring it Sat, i don't know exactly what's going on Friday night. Don't want to push my luck with the Boss.

[bootsdodgejn]

hey Scott. what time we startin Sat

[getblown5.9]

Ok so lets wait a minute, Jeannine won't be home Sat so i wasn't on planning on an all out party, just a wrenchin day with the guys & then a bonfire.[coffee]
Nothing spectacular.
Brad you can bring your truck and we will just drop the t case right on your trailer. that way if you need parts you can still get the truck home.
Todd you can bring your camper but bring it Sat, i don't know exactly what's going on Friday night. Don't want to push my luck with the Boss.

Well scott, even if it snot an all out party, you are letting us all come work on the trucks and hang out for the fire, everyone can bring a little something to share for dinner, and not make it an all out party. as long as your grill is there i can bring some hot dogs or hamburgers and rolls, and some barley pops...if thats ok with you.

This way the boss doesnt have to cook or clean anything up?

[TKC2000]

Ok so lets wait a minute, Jeannine won't be home Sat so i wasn't on planning on an all out party, just a wrenchin day with the guys & then a bonfire.[coffee]
Nothing spectacular.
Brad you can bring your truck and we will just drop the t case right on your trailer. that way if you need parts you can still get the truck home.
Todd you can bring your camper but bring it Sat, i don't know exactly what's going on Friday night. Don't want to push my luck with the Boss.

No problem, what time were you thinking of getting started? I always have the grill in the trailer and then there's the left over beverages [coffee][coffee].
Keith, I will have Krysten with me, she's happy that your girls will be there also.
Need to do an oil/oil filter/fuel filter change out on my truck.

[Sea:\>Drive]

Doesn't sound like they are welcome, sounds like Scotte wants to keep it low-key, which is cool too.

[ruquik]

Need to do an oil/oil filter/fuel filter change out on my truck.


I'm real good at doing those,LOL[whistle][whistle][whistle]

[TKC2000]

Doesn't sound like they are welcome, sounds like Scotte wants to keep it low-key, which is cool too.

I was kind of thinking that after I posted earlier. Seems I may have mistaken what the plan for this weekend was [duhhh], no problem though, sorry Scott [redface].

[scottsjeeprolet]

Well scott, even if it snot an all out party, you are letting us all come work on the trucks and hang out for the fire, everyone can bring a little something to share for dinner, and not make it an all out party. as long as your grill is there i can bring some hot dogs or hamburgers and rolls, and some barley pops...if thats ok with you.

This way the boss doesnt have to cook or clean anything up?

Sounds like a plan to me. Kids are welcome just have to stay out of the house, there won't be any adults in there.
Pretty much gonna be geared more towards a bunch of drunk guys playin with fire.http://smilies.vidahost.com/contrib/ruinkai/flame.gif[coffee]
I've got the grill for food too.http://smilies.vidahost.com/otn/party/beerchug.gif

[06 DIESEL]

And do not forget I will be bringing chili, bring your appetite.

[06 DIESEL]

Scott / Leonard - I need a member applicatcation for the guy I am buying the tires from for the Jeep. He is a diesel nut come to find out and has a 05 crew long CTD that he wants to bomb. He is going to sign up for the site tonight or tomorrow.

[getblown5.9]

Sounds like a plan to me. Kids are welcome just have to stay out of the house, there won't be any adults in there.
Pretty much gonna be geared more towards a bunch of drunk guys playin with fire.http://smilies.vidahost.com/contrib/ruinkai/flame.gif[coffee]
I've got the grill for food too.http://smilies.vidahost.com/otn/party/beerchug.gif

cool deal, im sure no one means to intrude...

if i bring my bow with me...there may be some real fresh meat to throw on the grill [laugh]

[BigErksG2]

hey scott, whats biodiesel runnin from the guy by your house? i wanna try it in my truck and see how it runs before it gets too cold maybe burn it on the ride back to frostburg one weekend. Im prolly gonna do my own setup if all works well.

[scottsjeeprolet]

Hey Eric i'm not sure i haven't ran it in quite a while.
You can find your nearest place here Nearbio (http://nearbio.com/)

[bootsdodgejn]

hey scott, whats biodiesel runnin from the guy by your house? i wanna try it in my truck and see how it runs before it gets too cold maybe burn it on the ride back to frostburg one weekend. Im prolly gonna do my own setup if all works well.

LOL Biodiesel. Fun Stuff

I think the price is $2.50

[getblown5.9]

at the current rates of $2.50/gallon to $3.25/gallon, I'd only have to burn 13,333 gallons of bio or $33,332 worth of bio in order to save myself the $10k it will cost me for a new motor

[TKC2000]

TJ, are you saying bio will ruin your motor?

[Sea:\>Drive]

Cool with the kids and all. Krysten can keep the girls happy in the camper while the rest of us play with fire. Have to bring the wife, she's my designated driver for the ride home....

So everybody bring sumthin'. Make it easy so we just burn all the trash, and there won't be any cleanup, just men playing with fire as El Presidente wishes.

We're not worthy, we're not worthy [guitar][guitar][guitar]

[skynyrd]

Scott / Leonard - I need a member applicatcation for the guy I am buying the tires from for the Jeep. He is a diesel nut come to find out and has a 05 crew long CTD that he wants to bomb. He is going to sign up for the site tonight or tomorrow.

travis tell him to just e-mail the mddtr33 e-mail and we will get one to him.

[TKC2000]

OK, so my camper becomes the middle school daycare...cool :cool:...[duhhh][laugh]. I'll make sure the PS2 hooked up [roll].
So we have chili, burgers, hot dogs, taco dip, and I'm bringing what beer I have (couple cases) [coffee].
Leonard - Cindy isn't coming so you'll be on your own for the fruity drinks [laugh].
What else should we bring? macaroni salad or something like that?
How about paper plates and plastic utensils? They burn real good [laugh][coffee].

[skynyrd]

i have my daughter saturday and a friends birthday celebration saturday night so i won't be able to make it.

[bootsdodgejn]

TJ, are you saying bio will ruin your motor?

I know it will bring ur fuel pressure down
I ran bio in my truck for a while and actually felt a loss in power

[ctd89-99]

Guys, is anyone thinking about going to MIR Nov. 10th. For the Mopar race and show ??? Thanks Steve B.

[getblown5.9]

nope steve, my other hobby calls...sled pull in Easton that day.

[skynyrd]

there is a sled pull down at tuckahoe (easton) nov 10 as well.

[scottsjeeprolet]

So lets get started at about 12anoonish.

[getblown5.9]

ill be there late...i'll be in the woods til noonish, drive home, load up tires :D

and then over to scotts with a video camera!

[06 DIESEL]

Chalk one up for the oil burners :) Diesel break even point is lower than a hybrid.

http://www.edmunds.com/advice/strategies/articles/121734/article.html

[iker42]

Just So Ya'll know, Diesel meet at my place, early December. Check on the PA#15 Meat and Eat thread.

[MTC]

Been lurking here and met a few of you guys a while back at a couple of the Buck events. What all is involved in joining and how do you go about it?

[scottsjeeprolet]

Been lurking here and met a few of you guys a while back at a couple of the Buck events. What all is involved in joining and how do you go about it?

Just email me at the below address and i'll send you an application, fill it out and email it back and your a member. Read up above ^^^ we are having a wrenchin day tomorrow at the Cummins Cave.[coffee]
Where ya live? it's not in your sig.

[MTC]

I live in good ole Parkville. I'll shoot ya an email here shortly. I appreciate the invite for tomorrow, but I'll have to take a raincheck...promised my boy I'd take him to shoot his new rifle. I'm gonna run up to Elk Neck. Thanks again, and look forward to getting together with you guys.

[scottsjeeprolet]

Well we will be having a bonfire later too.[coffee]
& ya live right down the street from me.

[MTC]

I shot ya an email.

...And I still have leftover firewood in the truck from last weekends camping trip...I have previous plans for tomorrow eve., but I look forward to meeting you guys in the near future.

[bootsdodgejn]

hey tj can u tell me how u did installed ur gagues again with the angle iron

[getblown5.9]

boots i still have my angle iron piece already cut to fit, with the moutning rings for the gauges on it...spray some black spray paint on it and it would be ready to go...you can have it and ill show you how to make it fit

[bootsdodgejn]

well when u going to be up this way

[getblown5.9]

no idea boots...not tonight, but sometime this week ill be up there

[bootsdodgejn]

k no prob thanks

[bootsdodgejn]

k no prob thanks

[06 DIESEL]

So Scott, did you get any good pictures from yesterday?

[06 DIESEL]

Here is a link to Comp D with a number to call and try to get your crached dash replaced for FREE, or cheaper than normal. Just thought I would pass it on for you guys, I think there are a few cracked dashes out there.

http://www.competitiondiesel.com/forums/showthread.php?t=14499

[scottsjeeprolet]

Well i still don't feel quite right. But none of this.http://smilies.vidahost.com/cwm/cwm/puke.gif
thanks to all who came out, Keith thanks for bringing the grillable stuff, Mark the Taco dip was awsome as usual.
The rumors are true Brad does have shoes.
http://i96.photobucket.com/albums/l192/scottsjeeprolet/Wrenchinday11-3-2007004.jpg
nice 1st gen
http://i96.photobucket.com/albums/l192/scottsjeeprolet/Wrenchinday11-3-2007001.jpg
Grilling at the Cave
http://i96.photobucket.com/albums/l192/scottsjeeprolet/Wrenchinday11-3-2007009.jpg
that's a fire!!:o
http://i96.photobucket.com/albums/l192/scottsjeeprolet/Wrenchinday11-3-2007013.jpg
TJ's tire shredding.
http://i96.photobucket.com/albums/l192/scottsjeeprolet/th_Wrenchinday11-3-2007014.jpg (http://s96.photobucket.com/albums/l192/scottsjeeprolet/?action=view&current=Wrenchinday11-3-2007014.flv)
Hey TJ where is your video?

[bootsdodgejn]

hey tj never mind about the bracket im just going to get the piller pod for them instead

[getblown5.9]

they dont make one for those size gauges

[bootsdodgejn]

darn that stinks

[bootsdodgejn]

are thier any pods that are for that size

[getblown5.9]

nope, you might be able to find a generic bezel or something that will hold 3 of the 2-5/16" gauges and you can bolt that up to the dash, but if not i will help you put that angle up there and make them fit like mine used to.

[getblown5.9]

my video for those who missed it saturday night...

http://www.youtube.com/watch?v=vcbzvCRGOgA

[paroxysym]

my video for those who missed it saturday night...

http://www.youtube.com/watch?v=vcbzvCRGOgA

love the closing statement...

"this video was filmed on a closed course with the help of a professional stunt driver under proper supervision." [laugh]

[Sunir]

my video for those who missed it saturday night...

http://www.youtube.com/watch?v=vcbzvCRGOgA

Holy crap TJ that was awesome![guitar]....

looks like another great time had by all over the weekend...sorry I missed it again. Hope to make a wrenchin day coming up soon...I have some parts come in, just haven't been able to get it together to make it up. Thanks to Len for stopping by my office the other day and helping me diagnose a power steering issue...looks like I have a leaking steering gear box situation...it'll probably need replaced :(

[Sea:\>Drive]

Was a great wrenchin' day for all who missed it, and that burn out was more impressive in person. Next time we're putting all four tires on that beast!

[skynyrd]

well if i evre get my line loc install and a crappy set of tires i might be making a video til the tires a gone

[06 DIESEL]

Nice TJ, so I guess that we are proper supervision, and you are a professional stunt driver.

[biggerkin]

Shorty says your burnout was awesome..as he says HORSEPOWER!!![director]:o:o:o:o

[ruquik]

1st gen for sale on ebay. Nicier than mine.[guitar]

CHECK IT OUT (http://cgi.ebay.com/ebaymotors/Dodge-Ram-2500-1991-Dodge-2500-Cummins-4X4_W0QQitemZ160176786012QQihZ006QQcategoryZ119143 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)

[scottsjeeprolet]

1st gen for sale on ebay. Nicier than mine.[guitar]

CHECK IT OUT (http://cgi.ebay.com/ebaymotors/Dodge-Ram-2500-1991-Dodge-2500-Cummins-4X4_W0QQitemZ160176786012QQihZ006QQcategoryZ119143 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)

the dump bed will come in handy for dumping all your drunk buddies out of when you get home.[dummy][roll]

[12 flapper]

I think brad should buy it so her can dump his garbage out

[ruquik]

the dump bed will come in handy for dumping all your drunk buddies out of when you get home.[dummy][roll]


I think brad should buy it so he can dump his garbage out

You guys suck!!

[Sea:\>Drive]

It is all out of love for you man....[laugh][laugh]

[ruquik]

Anyone want to go to the Fuel, Trapt, w/ Submersed, Endeverafter, concert tonight at the Ram's head (lol kinda fitting).

I won tix last night, and no one wants to go.

I want to have a good time since its my birthday, but going alone is dumb/sux

Call me if you want to go.

302-258-5271

[ruquik]

Rams Head Live (http://tickets.ramsheadlive.com/eventperformances.asp?evt=85)

[BigErksG2]

if you see a group of security guards (6'6'' lankey kid, 6'3'' lankey kid and a 6'0'' stump) they look like the 3 stooges, tell them i said hi. id go if i wasnt in frostburg. sounds like a good time.

[b4wheeler]

I'd go if I didn't have my son. Fuel should be great live.......

[skynyrd]

so is anyone going down to tuckahoe (easton) for the sled pulls saturday? tj is most likely going to be pulling. i'll be down there but not pulling. here is the post
http://www.dieseltruckresource.com/dev/showthread.php?p=1781649#post1781649

[Sunir]

I missed Truckahoe...how was it? How'd TJ do? Hope everyone is gearin' up for the holidays, looks like more goodies for the truck for lots of folks I'd bet during the holiday season...means more wrenchin days...woohoo[coffee][guitar]

[BigErksG2]

speakin of wrenchin days... how is next weekend looking after thanksgiving? I wanna get my gsk and dowel pin taken care of. Ill prolly bring a friend who just bought a 95 5 speed 12 valve (+1 for the 12v club. haha) he wants me to tweak his fuel plate a little. im shootin for a 100hp tweak with a little whistle, i hope he doesnt mind. ill bring a case of beverages.

[92'1stGen]

I didn't know Tuckahoe had sled pulls this time of year, I go every year for there steam and gas show in July.

[IrishND]

Need help deciding on a possible programmer for Christmas. Looking at Diablo. Since I still have a stock tranny and injectors, I am looking for one that won't destroy anything.

I'm basically looking for something to give me a little more umph and better fuel mileage, also to clear codes and reprogram my computer for the tire size.

Looking forward to the next wrenchin day now that the knee is almost 80% healthy.

Bob

[06 DIESEL]

I have Diablo and am very happy with it. I also have a stock clutch and sticks. Puck/Predator combo on extreme got me the numbers in my sig. I drive it around detuned and it increased my fuel economy by 2-4 MPG.

[Sea:\>Drive]

Talk to Leonard, although his was a bit smoky blowing by this morning as I was pulled over outside the tunnel. Some dip rearended me inside the tunnel. Thank goodness I had the hitch there, no damage to my truck, but his poor van was a mess. To all those nay sayers that say the anti-lock brakes don't work well...my front end is fine, but my hitch has a few spots of black paint now.

[06 DIESEL]

Glad to hear that your rig is fine, thats one of those reasons that I always leave mine in.

[skynyrd]

Need help deciding on a possible programmer for Christmas. Looking at Diablo. Since I still have a stock tranny and injectors, I am looking for one that won't destroy anything.

I'm basically looking for something to give me a little more umph and better fuel mileage, also to clear codes and reprogram my computer for the tire size.

Looking forward to the next wrenchin day now that the knee is almost 80% healthy.

Bob

hey bob i'm selling my hot juice if your interested with it and a ez i put down 507hp to the rear wheels

[getblown5.9]

smarty hands down

[robmints]

Need help deciding on a possible programmer for Christmas. Looking at Diablo. Since I still have a stock tranny and injectors, I am looking for one that won't destroy anything.

I'm basically looking for something to give me a little more umph and better fuel mileage, also to clear codes and reprogram my computer for the tire size.

Looking forward to the next wrenchin day now that the knee is almost 80% healthy.

Bob

On a wrenching day you could try a Smarty if you want. Could he try your EZ Leonard? Doesn't BiggerKin have a quad? And Travis has Diablo. Does the ppe do what he wants?

[06 DIESEL]

Travis has Diablo.

Yes I do but it is 06-07 exclusive, sorry I would let you try it if it would work.

[skynyrd]

yeah if he wants if i still haven't sold it he can try the ez and juice stacked

[getblown5.9]

if not i have dads EZ that he can try, and i have a 3rd gen smarty that he can try too

smarty hands down tho, its smooth, makes a ton of power if you want it, and is infinitely adjustable with all the different programs out there for it you can download depending on what other mods you have

[paroxysym]

i have my quad xzt he can throw on too. looking to get rid of that....

[IrishND]

Sounds like I got some options. I'm basically looking for Fuel mileage and just a little power right now.

Also....anyone know someone or if you are selling a jeep wrangler or older yota pu 4x4????? I'm looking for a beater vehicle to drive around since diesel cost is getting out of control. Looking to spend about $2k.

[scottsjeeprolet]

Hey Bob look on Craigslist.org they have quite a few old Jeep XJ's for cheap, just ask Travis or TJ.

[paroxysym]

Sounds like I got some options. I'm basically looking for Fuel mileage and just a little power right now.

Also....anyone know someone or if you are selling a jeep wrangler or older yota pu 4x4????? I'm looking for a beater vehicle to drive around since diesel cost is getting out of control. Looking to spend about $2k.

you sound like me.... im doing the same. however, im afraid if i buy a jeep ill sink more money into it than the truck and the truck wont get done and i pretty much bought a truck for nothing...

[06 DIESEL]

Also....anyone know someone or if you are selling a jeep wrangler or older yota pu 4x4????? I'm looking for a beater vehicle to drive around since diesel cost is getting out of control. Looking to spend about $2k.

Here is a search for a Jeep on Craigslist under $2,000

http://baltimore.craigslist.org/search/car?query=jeep&minAsk=min&maxAsk=2000&addTwo=

Jeep Wrangler under $2,000

http://baltimore.craigslist.org/search/car?query=jeep+wrangler&minAsk=min&maxAsk=2000&addTwo=

[P.J]

CUMMMINS on Craigslist for under $2K[whistle]

http://baltimore.craigslist.org/car/478178602.html

[06 DIESEL]

CUMMMINS on Craigslist for under $2K[whistle]

http://baltimore.craigslist.org/car/478178602.html

I see a pulling truck for someone [whistle]

Honestly, I think we should all put in some money and buy it as a group, wrench on it as a group, pull it as a group, I think it would be great fun [guitar]

[iker42]

or i'll buy it

[P.J]

or i'll buy it

Get on it, $1,900 sounds more like $1,500 to me. Slap another $2K in it, you could have a decent truck.

[iker42]

ima call him tonight
offer him 1500

[P.J]

ima call him tonight
offer him 1500

I met a guy, from Mount Airy at the Mason Dixon event at the Cecil County drag strip. Can't remember his name, anyone know who I am talking about, same color truck as mine, 06, SRW, tinted windows, some chrome, dude looked like he was in his 40's or so......

Anyway, if I could figure out who he was maybe he would run out and make sure it's not a total POS for you.

[getblown5.9]

I met a guy, from Mount Airy at the Mason Dixon event at the Cecil County drag strip. Can't remember his name, anyone know who I am talking about, same color truck as mine, 06, SRW, tinted windows, some chrome, dude looked like he was in his 40's or so......

Anyway, if I could figure out who he was maybe he would run out and make sure it's not a total POS for you.

Wayne, red hair, goes by wildbore on the mason dixon forum



PS- if i could sell my jeep, i would but that 1st gen in a heartbeat to start on a pulling truck. I've always liked 2nd gens and wanted a second gen to make into a real puller, but after see the videos on this site http://www.moonlightdiesel.com/index.php?option=com_expose&Itemid=32

I now want a first gen done right with a hefty power plant under the hood!

[P.J]

Huh, Wayne? That's not what I was thinking, he looked more like a "Jim".
Had to leave early that day to roll home for a medical emergency with his wife.

[getblown5.9]

the only Jim i know has a white reg cab and was pulling a trailer i think.

Wayne has a 4 door silver 06, pretty fast (12.0's) and had a contractors cap on the back.

there may have been another truck that you are referring to, but i know wayne is from up in that area and has the 06 SRW silver truck

[P.J]

Ah, I know the guy you are talking about. Nah, this guy was basically stock, he tried out my smarty,.......... then probably went home and ordered one.

[fiveology]

Wow, TJ, that truck is incredible.

[06 DIESEL]

Here are the pictures from today, they found a few dents that they missed and are still waiting on the cap to be done, I should get her back Friday the 23rd.
http://i211.photobucket.com/albums/bb51/06DIESEL/Wreck%209-29-07/Update%2011-16-07/truckupdate11-16-07006.jpg
http://i211.photobucket.com/albums/bb51/06DIESEL/Wreck%209-29-07/Update%2011-16-07/truckupdate11-16-07005.jpg
http://i211.photobucket.com/albums/bb51/06DIESEL/Wreck%209-29-07/Update%2011-16-07/truckupdate11-16-07003.jpg
http://i211.photobucket.com/albums/bb51/06DIESEL/Wreck%209-29-07/Update%2011-16-07/truckupdate11-16-07002.jpg
http://i211.photobucket.com/albums/bb51/06DIESEL/Wreck%209-29-07/Update%2011-16-07/truckupdate11-16-07001.jpg
http://i211.photobucket.com/albums/bb51/06DIESEL/Wreck%209-29-07/Update%2011-16-07/truckupdate11-16-07004.jpg

[scottsjeeprolet]

Travis i would be like "Hey call me when the cap is done, i'm taking my truck today!!

[P.J]

Looks pretty good in the pics, much better than down a ditch against a pole.....

I like that color too, I think whenever I get rid of this truck it will be for an 06 SRW 1 ton in that color (if there is such a thing?)

[bootsdodgejn]

well finally got the gauges in all i need now i just get the trans temp connected up

[MTC]

Im a new member of the chapter with my first question for the Local guys...My truck is coming up on 15K miles and the manual suggests changing out the front and rear diff. fluids. In your opinions, is this needed yet and is it something I can do in my driveway? I can and have done all my regular maintenance but I have never attempted this and the dealership wants my first born to do it. Like I asked before, is it really needed yet and is it a simple task? I just wanted to get the local guys opinion on it.

[P.J]

Yes, it is really something you should do. Do you tow much? I have 14,500 on mine, I am gearing up (pun intended) to do mine also. From what I have heard, some guys are surprised how nasty the rear is, the front should be pretty much golden, unless you do an awful lot of 4WD driving.

I am going to do both, just for good measure. It is a re-usable gasket. Getting both surfaces really clean will be a wise thing so you don't have any little leaks.

75-90w GL-5 rated synthetic fluid. The bolts get torqued to around 26 ft. lbs. From what I read, the spec is 30 but people have been snapping them at 30. The rule with diffs and trans pan bolts is "Tight is good, too tight is broken".

Drain plug is supposed to be 32 ft. lbs.
4 quarts in the rear, 3.75 in the front.


Where are you located?

[P.J]

Oh, I got rambling there, YES it is something you can do, if you change oil, you can certainly change these diff fluids.

[06 DIESEL]

Travis i would be like "Hey call me when the cap is done, i'm taking my truck today!!

They also have four dents to fix still, along with cleaning the interior, bed, and cleaning the truck. I looked her over with a fine tooth comb, I found three of the dents that they did not even have marked[duhhh] I am ready to have her back, the cap is selling on Monday, hopefully I get her back Friday so I can deliver or have them pick up on Sunday, got to work Friday and Saturday :(

[lukedaemon]

Travis, its good to see the truck back together. Still amazed and more so some what. I mean I have seen some poles thrash vehicles and now yours looks great in the pictures. I know they have finishing touches but good to see they have talent.

Peace

[MTC]

Thanks P.J. I do tow alot and guess that I will be doing this shortly. Since I'll be doing more of the maintenance on this truck, I guess I have to spend some $$ on torque wrenches and such(my tools are limited).

I'm located in Parkville.

[P.J]

I just got the cheesy tang (whatever it's called?) Craftsman one. Considering it is one of the least used tools in the box, I didn't see the sense in spending a whole lot of money on one.
Mmm, Parkville. You are REAL close to the hot spot for Cummins enthusiast. If you keep an eye on the threads in the MDDTR section at some point Scot will have a Wrench'n Day at his place.
Either that or let me know and you are welcome to stop by my place, like I said I will be looking to do mine here in the next few weeks anyway (along with oil change, fuel filter, some other stuff).

[MTC]

I know I'm prolly making too much of an issue out of something thats really simple to do, but once I see something done I'm good to go. If you dont mind, give me a heads up when you do yours and if I'm free I'd like to come up and watch.

[scottsjeeprolet]

Thanks P.J. I do tow alot and guess that I will be doing this shortly. Since I'll be doing more of the maintenance on this truck, I guess I have to spend some $$ on torque wrenches and such(my tools are limited).

I'm located in Parkville.

No need to buy all that stuff when we have it in the CAVE, and if we don't someone will bring it. I have a digital torgue wrench for just about everything.
I am trying to decide when to have the next wrenchin day. Marc you are only just down the road from me. Let me know when you get your fluids and we can put it on the lift and do it.

So what do you guys think is a good day for a wrenchin day?
I'm off Wed til Monday thanksgiving week.
I'm thinking something lite Friday and maybe an all day thing Sat.

[06 DIESEL]

I have to work Friday, not sure about Saturday, hopefully not but if the guys are working I also have to it is my week :( maybe they will only work til noon:) Should have my truck back so we can put the stacks on at the wrenchin day.

[P.J]

I know I'm prolly making too much of an issue out of something thats really simple to do, but once I see something done I'm good to go. If you dont mind, give me a heads up when you do yours and if I'm free I'd like to come up and watch.

Watch? I was going let you practice on yours while I watch! (then do mine)[laugh]

Might as well meet up with Scot as his place, the lift makes most any job easier. If we did it at my house we'd be crawling around on my garage floor.


So what do you guys think is a good day for a wrenchin day?
I'm off Wed til Monday thanksgiving week.
I'm thinking something lite Friday and maybe an all day thing Sat.

I'm up for either day, I might as well do my diff fluids there too if you don't mind. ;)
MTC: Let me know when you want to do it, if either of those days are not good for you we can do it up here at my place.

[BigErksG2]

ill be puttin my stack on tuesday at my house and most likely doing my friend's fuel plate on his 95 5 speed with some gauges. I do want to come up to the cave and do my gsk and hopefully the kdp. Friday or saturday works for me.

[MTC]

Figures, I gotta work evening shift Fri and Sat(2-10) off Sun. Depends on what time you get started on Saturday, but it probably wont be early enough for me to get to work. I'm at 14,4xx now, so if I cant make it this time, then definately next time...shift work is great[verymad].

[scottsjeeprolet]

So who's off Wed this week? I took it off and don't have to go back to work until Monday. I think i'm gonna do my dash on Wed.

[06 DIESEL]

I have to work but can give you a hand after I get off work if you still need a hand then.

[skynyrd]

i'm still waiting on word if i have my daughter or not wednesday if i don't i'll stop by after i skip out of work early

[BigErksG2]

I might stop by wednesday as well. I have to see my gf off to myrtle beach that day.

[bootsdodgejn]

wednesday ill be off to bufflo.
Hopefully my truck will make it up there just got to get the wheel rebalanced (dealer did a bad job on it. Tons on weights)lol

[scottsjeeprolet]

Check out this RV. Great for anyone with toys.
Big Bus (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180179322126)

[Sea:\>Drive]

Sorry have to work on Wednesday [verymad] Things are changing around here and I'm not sure if I'm liking the changes....so if anyone knows someone looking for an IT manager...I could be easily persuaded out of my current position.

[Sunir]

Sorry have to work on Wednesday [verymad] Things are changing around here and I'm not sure if I'm liking the changes....so if anyone knows someone looking for an IT manager...I could be easily persuaded out of my current position.

give me a call, let's talk...

[scottsjeeprolet]

Hey Keith you and Leonard could truck pool.[coffee]
Hey Sunir we can knock out your mods this weekend if you like. Friday or Saturday are good for me. Remember Coors light and or either gas for the gen or diesel for the heater.

[P.J]

Check out this RV. Great for anyone with toys.
Big Bus (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180179322126)

What are you searching to end up seeing that?[laugh]

[scottsjeeprolet]

What are you searching to end up seeing that?[laugh]

Friend of mine sent me this Blue bird w/ Cummins (http://baltimore.craigslist.org/car/480843409.html)

[scottsjeeprolet]

Hey TJ here is what you might be looking for Pullin truck (http://baltimore.craigslist.org/car/482608014.html)
Cheap too...........

[BigErksG2]

what time we startin friday and what time we startin saturday? I cant make wednesday between the gf, stack, friend's truck, and bonfire. Yall are welcome to stop by and consume some beverages if youre in the area. Everyone is welcome. PM me for my number and ill give you directions, im right off rt40 and chesaco ave. 4 blocks from AA Bolt.

[biggerkin]

Roll call for the "cave"????[coffee][coffee][coffee][coffee]They are gonna taste good..ya know the barley pops LOLOLOLOL

[Sea:\>Drive]

Tough weekend for me, usually decorating all weekend (yes the wife goes way over board). I'm off on Friday but may be too tired after the "black friday" affair but I'll try to make it over Friday if something is going on.

[skynyrd]

i'll be over wednesday evening for a while! then its up to PA to see my sister for the weekend

[scottsjeeprolet]

So let's have a wrenchin day Sat. If you need to use the Cave on Friday your welcome but i might not be able to help. Gotta knock out some Honey doo stuff around the house.
So 12anoonish Sat?

[06 DIESEL]

Noonish then, I still am not sure if I have to work Saturday or not, but if not you can count on me being there on time, if I have to I will be there as soon as we are done for the day.

[crabbelle]

Scott, do you mind if i bring my truck up and take a look at the fuel leak? i narrowed it down to the return fuel hose? also i got gauges and maybe a stack too. i email the "33" chapter to join but no response. i may have to tow it up there with the other truck (ford) i hope i can leave in one piece. tell if i need to bring anything.

[06 DIESEL]

Remember Coors light and or either gas for the gen or diesel for the heater.

Here is what he posted earlier.

[crabbelle]

ill bring diesel since i cant buy beer, and i like staying warm.

[scottsjeeprolet]

Scott, do you mind if i bring my truck up and take a look at the fuel leak? i narrowed it down to the return fuel hose? also i got gauges and maybe a stack too. i email the "33" chapter to join but no response. i may have to tow it up there with the other truck (ford) i hope i can leave in one piece. tell if i need to bring anything.

I sent you the application on the 18th and again tonight to your yahoo email.
Bring the truck on over and we'll have a look.

[BigErksG2]

saturday it is. ill bring some brew, possibly some food. anyone thats gonna be there done a kdp before? thats on the to-do list :(

[BigErksG2]

anyone know where kelly truck parts is? i need some 5 inch flex pipe, 5 inch 90*, and some clamps. hoping to get everything done tommorow morning.

[skynyrd]

kero might be a little cheaper than diesel right now and it burns just the same in scotts heater

[crabbelle]

ok, i need to find a trailer now, i usually my neighbors but he isnt home. any ideas i can come and pick up if anyone is willing to let me borrow it. ill be up in the belair on thanksgiving but i will usually be in the pasadena area.

[MTC]

I'll have to wait for the next time you guys get together. Gotta work Fri and Sat (2-10).

[scottsjeeprolet]

kero might be a little cheaper than diesel right now and it burns just the same in scotts heater

The Citgo on the corner of Sunshine & Harford rd. sells Off road diesel, what ever is cheaper. My heater burns it all, but just like my truck it doesn't like the Bio.[yuk]
As far as Kelly truck parts i can't find anything, i Googled and yellow paged and nothing.[duhhh]

[IrishND]

Quick question for you all: I had my computer RPM set to 601 due to the 35" tires I put on. I think my speedometer is off. At roughly 1500rpm's my speedo is reading 70mph, around 1800rpms, its reading 80mph....is this correct?

Bob

[b4wheeler]

ok, i need to find a trailer now, i usually my neighbors but he isnt home. any ideas i can come and pick up if anyone is willing to let me borrow it. ill be up in the belair on thanksgiving but i will usually be in the pasadena area.

I'd give you mine, I am right down the road, but I am sure your truck will kill it. It is only a 7700 pounder....

[scottsjeeprolet]

Well as of right now i haven't started on my dash but soon.
Today i went to American Bio Diesel to get a couple of gallons and Greg said he is no longer selling it, the Feds wanted him to tack on .45c per gallon and he said no way.[dummy] I thought he was on the up and up but apparently not. He should have always been charging the Road tax.[duhhh][duhhh] I'm sure now he wil get the IRS audit and get you know whatted.:o

[skynyrd]

Quick question for you all: I had my computer RPM set to 601 due to the 35" tires I put on. I think my speedometer is off. At roughly 1500rpm's my speedo is reading 70mph, around 1800rpms, its reading 80mph....is this correct?

Bob

nah bob thats off i'm at about 1800 i'm doing 70mph and thats with 35's and 3.73 gears

[bootsdodgejn]

Well as of right now i haven't started on my dash but soon.
Today i went to American Bio Diesel to get a couple of gallons and Greg said he is no longer selling it, the Feds wanted him to tack on .45c per gallon and he said no way.[dummy] I thought he was on the up and up but apparently not. He should have always been charging the Road tax.[duhhh][duhhh] I'm sure now he wil get the IRS audit and get you know whatted.:o

darn i thought he was smart enough to do that. I was talking to his son a while back and i thought he said they were.

Well now were is a bio diesel station.

[IrishND]

Thought it was. If was funny, I was going home last night and my speedo said I was doing 80....and I'm getting passed.

Leonard....how do I fix this? Is this a computer issue?

[skynyrd]

you can have the dealer change the pinion factor in the ecm or a smarty can change it.

wierd thing is when i put my 35's on i was actually driving faster than my speedometer was reading no the opposite. it could be the sensor has gone up. have some one drive next to you and check the speed or a gps. if your coming down scotts this saturday he has a gps unit thats how i was able to tell how far off mine was.

[Sunir]

Hey Keith you and Leonard could truck pool.[coffee]
Hey Sunir we can knock out your mods this weekend if you like. Friday or Saturday are good for me. Remember Coors light and or either gas for the gen or diesel for the heater.

Thanks Scott...unfortunately doesn't look like I'll have the truck back...it's at the body shop right now awaiting a new front windshield which was damaged from a large rock...I could have had it done through a glass delivery service but my insurance folks are using a vendor for the original factory glass which is on backorder and I wanted to have a body shop I've dealt with before make sure it's done right...

I will be taking ya up on the mods offer soon...rest assured barley pops around on me bro! :)

[skynyrd]

sunir have you gotten that steering issue fixed yet?

[IrishND]

After this last trip to the dealer, pretty sure I won't be going back to ANY dealership again. so angry right now...........

Leonard, can we take care of the computer with a programmer instead of the p.o.s. dealer?

[skynyrd]

yeah a smarty will change it but when you unload the smarty it will take the changes with it. there are a couple other programmers that are the same but are the same way with removing the change when removed from the system.

[06 DIESEL]

Quick question for you all: I had my computer RPM set to 601 due to the 35" tires I put on. I think my speedometer is off. At roughly 1500rpm's my speedo is reading 70mph, around 1800rpms, its reading 80mph....is this correct?

Bob

I also have gps on my laptop, I will bring it with me to the cave, might be a little easier than scotts, not sure though.

[meangreen96]

Hey fellers what's going on? Scott told to drop by the never ending thread. I just joined the chapter - looking forward to meeting you and seeing your trucks.

If possible I might hit you guys up for some advise on putting in my #10 plate, tuning, etc... Although I need to get my EGT gauge problem fixed first. I will probably install my new thermocouple this weekend. Hopefully that fixes my sporadic/intermittent readings.

Anyway, have a good turkey day.

- Craig

[Dave88LX]

Someday, SOMEDAY I will make it out there to meet you guys! My truck is running like total dogcrap right now, I need to fix it before I get it out there.

[BigErksG2]

meangreen96.... welcome to the 12 valve club! (i think its 3 of us now) oh yea and that chapter 33 thing too. haha you should come up to scotts saturday. im doin a gsk and kdp on my truck, gauges and fuel plate on my friends 95 and heck while im at it ill do yours. you dont need a fuel plate, just bring your truck and we will take care of the rest. JUST SO EVERYONE KNOWS LEANORD WAS SELLING BUICKS AT THE BONFIRE AND HE WAS PRACTICING THE TEXAS TWO STEP, DONT FORGET TO MAKE FUN OF HIM!!!!

[b4wheeler]

Someday, SOMEDAY I will make it out there to meet you guys! My truck is running like total dogcrap right now, I need to fix it before I get it out there.

What is wrong with it, and can it make it out there. We can take a look at it Saturday...

[crabbelle]

Eric you need to change you sig about your exhaust. Also i may be going to help to flow line or coliflower to pickup fuel hose. Also thanks anyway
B4wheeler. my F-350 only wieghts 8,000 and th dodge is a little smaller than that. see you all saturday.

[biggerkin]

[coffee][coffee][coffee]Whats going on?? Hows everything looking for tommorrow night??? Need pallets????[coffee][coffee]

[b4wheeler]

I will be there early, as I need to bug out early for a dinner date on the eastern shore.....

Should be fun...

I guess the valves will have to wait another few weeks....

[scottsjeeprolet]

Anyone who is planning to use the lift needs to bring some gas for Glenn's generator.
Remember i only have one bay open to use. So we'll getem in and out quickly.
Anyone got some thick sheet metal laying around? need some for the Jeep fenders i'm workin on.

[P.J]

I'm thinking about just doing my stuff here, fuel is just so ridiculous at this point. I've honesty used the truck twice in three weeks at this point, for a total of about 12 miles. She is sitting on empty and I'm dreading that fill up.

I may just lay on the cold concrete and do my diff fluids in the garage here, sucks but it makes more sense I suppose. I'm switching over to Rotella "Synthetic" for this (motor) oil change too.

[bootsdodgejn]

well i was just looking at the new dodge 5500 very nice.l
Hopefully putting on the stack today, if i can get to peters in time

[b4wheeler]

Someday, SOMEDAY I will make it out there to meet you guys! My truck is running like total dogcrap right now, I need to fix it before I get it out there.

If you want to go, and you see this post before 1030-1100, drop me a line and I can come pick you up. I am only staying until about 3:00ish, or you can follow me up if you want to work on your truck..
Just let me know by then. I will check this on my way out.......

[06 DIESEL]

Our Dodges,
Who art inline,
Hollow be thy cat
Thy timing advanced
Thy Dowel Pin done
In our shops
As it is in thy forums.
Give us this day
Our daily boost
And forgive us for our smokeclouds
As we forgive those morons who ask "Is that a Hemi?"
And lead us not into Duramax-tation
But deliver us from Fords
For Thine is the Cummins
The 12 and 24 valve
Forever they shall run

church will be held every sunday at The Church of The Blessed Mother of Acceleration on the corner of 3rd gear and floor it.

[IrishND]

Additive question for you all. What are you using? I've read others using 2 cycle oil, different combinations and mixtures. Its all a little confusing to me.

Bob

[Sea:\>Drive]

I use nothing just so when I make it to 500k miles I can say "told you so"! [laugh][laugh]

[scottsjeeprolet]

Bob just get the Power Service white bottle from Wally World.
Travis nice prayer.

[scottsjeeprolet]

Anyone have a 4.5" hole saw they can bring with them today. We need it to install Travis's stacks.

[meangreen96]

I'll have to catch up with you guys the next time.

[IrishND]

Scott, do you know which white bottle? I looked on the site and there is are a few white bottles.

[scottsjeeprolet]

Bob the only ones i know of at Wally world are the silver bottle and the white. the white has the anti gel ( winter mix) in it.

[bootsdodgejn]

any of yall no were i can get a 5inch to 6inch exhust adapater.
i went to peter they said they dont cary them and neither does any one in the area

[biggerkin]

Try FLEET on 40 on monday[laugh]

[bootsdodgejn]

what part of 40 they on

[scottsjeeprolet]

what part of 40 they on

On 40 by Chesaco ave. next to the Percision tune.

Well i had a good time today working on 2 under valved trucks. Eric sure is learning a lot about them. I thought i knew what a GSK was and now i do.
Nice to meet one of the newest members Bob.
Todd even showed up.
TJ any luck with hunting?
Congradulations to Lloyd on achieving 1280 HP on the dyno, one of our fellow members.

[06 DIESEL]

Scott, you got any pictures from today? Nice seeing everyone again today, it was different working on two 12 valve trucks instead of the 24 valve and CR trucks.

[Dave88LX]

When I FINALLY make it to a meet you'll have another 12 valver to tinker with. :D

[Dave88LX]

What is wrong with it, and can it make it out there. We can take a look at it Saturday...

Injector pump is jacked up.

Here is the story. [dummy]

http://www.dieseltruckresource.com/dev/showthread.php?t=126945

[Dave88LX]

Oh my God I suck, that was a year ago and I haven't fixed it yet. [laugh]

[iker42]

hey all - Meat and Eat at my house next sunday the 2nd.

http://www.dieseltruckresource.com/dev/showthread.php?t=175763&page=3

let me know if you can make it

[skynyrd]

Oh my God I suck, that was a year ago and I haven't fixed it yet. [laugh]

i think we might have to consider that cummins abuse. you know you can always bring the truck up on a trailer and we'll give you a hand fixing that injector pump!

[BigErksG2]

BOBBY SAW THE 12V LIGHT!!! PRAISE JEEBUS!!!! scott, you can say all you want about us 12 valvers but you know deep down inside you want one, its ok, your secret is safe with me. and they say you cant teach an old dog new tricks. ha i have learned alot since february when yall tag teamed my truck and took her v-card while i stood there in awe. ill admit it, im an addict now.

[06 DIESEL]

ha i have learned alot since february when yall tag teamed my truck and took her v-card while i stood there in awe. ill admit it, im an addict now.

[laugh][guitar][laugh] ROFLMMFAO :)

[biggerkin]

If you are gonna be home today call me. I want to pick up two chairs!![redface]:o 4436903551

[06 DIESEL]

Parts are up for sale
http://www.dieseltruckresource.com/classifieds/showproduct.php?product=14894&cat=11
Chapter members get first dibs if you act fast, all I need is a definate answer and they are yours, please PM for pictures and more details.

[MTC]

What shape are the nerf bars in?

[06 DIESEL]

Minor scratching on the bottom side and some light overspray close to the mounting brackets. You honestly can not tell that they were in the accident, I was shocked when they told me that they were going to be replaced. I have already offered these to another chapter member, but if he does not reply they are still on the market, I will keep track of who asks first.

[MTC]

No problem...let me know

[SINGLESTACK]

I sent a pm about the rear bumper.

[scottsjeeprolet]

Ok so who's planning on going the the PA Meet & Greet (http://www.dieseltruckresource.com/dev/showthread.php?p=1807532&posted=1#post1807532)
Let's try to get more MD guys there than PA guys.
Eric & Bob Wannadiesel might have his KDP jig with him, don't know for sure yet though.

[crabbelle]

ill go. maybe i ll get my stack by then. where can i get a 4" pipe from turbo back to run to a flex pipe? and what are you guys using to hold the pipe in place? oh and what day is it?

[06 DIESEL]

ill go. maybe i ll get my stack by then. where can i get a 4" pipe from turbo back to run to a flex pipe? and what are you guys using to hold the pipe in place? oh and what day is it?

The meet and greet is Sunday. What pipe are you talking about, the underside or the stack? There is a semi shop around that probibally caries it, not sure of the name though, someone will chime in with it shortly.

I'll go to the meet and greet also, nothing on the books as of now for Sunday, are we meeting at RF on RT 1?

[crabbelle]

the down pipe from turbo back to about the end of my cab then i plan on using a 4"-5" adapter than the flex pipe to a 6" bull hauler.

[scottsjeeprolet]

ill go. maybe i ll get my stack by then. where can i get a 4" pipe from turbo back to run to a flex pipe? and what are you guys using to hold the pipe in place? oh and what day is it?

Eric said he got all his parts at Fleet Auto on Rt40 next to the Precision tune on the corner of Chesaco. You know right by where ya used to live.[dummy]

[bootsdodgejn]

yea im proboly going there tommrow and also to d and l tintking

[crabbelle]

yea i know where it is put im not sure if they sell a pipe from my turbo back or do you think i should keep my down pipe stock? i want my egt low for when im towing or racing those 24 valves

[SINGLESTACK]

guys I sold my old truck for those that don't remember me I had the maroon 01 with the 7'' stack and now I have bought a 05 6 speed that I put a superchip on good/bad? give me feed back on that downloader but it was good enough to smoke my clutch on tow mode(90hp) so what is a cheap but good streetable clutch. SCOTT MAYBE ANOTHER WRENCHING DAY SOON PLEASE.
thank, tony

[06 DIESEL]

so what is a cheap but good streetable clutch. thank, tony

I do not think that those are common words together, I am looking at a SBC DD 3600# for mine, around $1600

[SINGLESTACK]

what clutch do you have in your truck to make 470 hp

[bootsdodgejn]

hey tony what color is ur truck so i know when i see u rollin through j vill

[skynyrd]

guys I sold my old truck for those that don't remember me I had the maroon 01 with the 7'' stack and now I have bought a 05 6 speed that I put a superchip on good/bad? give me feed back on that downloader but it was good enough to smoke my clutch on tow mode(90hp) so what is a cheap but good streetable clutch. SCOTT MAYBE ANOTHER WRENCHING DAY SOON PLEASE.
thank, tony

supperchips ahh you can do much better than that! i'm sure we can talk someone into letting you try a smarty and your welcome to try my TST or hot juice.

[bootsdodgejn]

yea anybody willing to let me try out a smarty for a day or two. might be getting one for xmas

[BigErksG2]

hey bob, get the downpipe offline. the 6" stacks usually go down to 5 in at the bottom, check it out first. i got mine off ebay through chromeroom. if you cant find a 4" - 5 or 6" adapter ill make you one like i did on mine, it may not be perty but it works and dont leak. i can rig up some hangers too, you just have to wait til i come home in 2 1/2 weeks.

[getblown5.9]

yea i know where it is put im not sure if they sell a pipe from my turbo back or do you think i should keep my down pipe stock? i want my egt low for when im towing or racing those 24 valves


i got a 24v if you want to race...you are gonna need alot more than a downpipe tho :cool:

[SINGLESTACK]

its a graphite 4 door short bed and lenord is your hot juice 4 sale?

[skynyrd]

yeah my hot juice is for sale

[06 DIESEL]

what clutch do you have in your truck to make 470 hp

Stock, it was slipping though, the numbers should be higher.

[biggerkin]

Never knew you had hot juice....LOLOLOL[laugh][laugh][laugh][laugh]

[skynyrd]

yeah thats why it put down 507 hp yeah i sent my juice out to be up graded to the hot version back in the spring. with a set of 90 hp sticks and a bigger turbo i could most likely hit 600hp +.

[06 DIESEL]

The hole saw kit just got here, I can not wait to cut that lovely hole in the bed. :)

And the gooseneck hitch will be here Friday [guitar]

[06 DIESEL]

PA is asking for a head count for Sunday, please vote

http://www.dieseltruckresource.com/dev/showthread.php?t=175763&page=6

[SINGLESTACK]

lenord edge box call me so we can talk 443-504-2038 and if anyone needs a 5'' whole saw I have one just call

[SINGLESTACK]

LEONARD sorry I keep writing your name wrong

[skynyrd]

ahhh you get used to it after years of having people not being able to pronouce my first or last name. telemarketers are the worst

[skynyrd]

so all is going to the PA meet and greet. this sunday? are we planning on meeting up and driving in a convey like usual?

[06 DIESEL]

I will not be able to make anything this weekend, I have to go home for one of my uncle's funeral. I am driving home probibally leaving Thursday afternoon.

[skynyrd]

sorry to hear about your uncle Travis be safe driving out there this weekend.

[ruquik]

well i was just looking at the new dodge 5500 very nice.l
Hopefully putting on the stack today, if i can get to peters in time

Where is it at, is it a quad cab with the short wheelbase????

[bootsdodgejn]

Where is it at, is it a quad cab with the short wheelbase????

keene dodge i think it was a mega cab

[getblown5.9]

Travis, sorry to hear about your uncle, have a safe trip.

I think I might go to that meet and eat thing, but they are calling for some cold nasty weather sunday...i may stay home, watch some football, and just relax. I been going steady for about 11 days now getting up at 3:45 a.m. to hunt and I am about worn out. Especially since the hunting has not been good, and the deer are hiding well this year LOL.

[TKC2000]

Travis, sorry for your loss brother. Drive home safely and give your family our best wishes and condolences from your DTR brothers.

[bootsdodgejn]

Sry for the loss travis. Have a safe trip


hey scott if u said happy b day today. u would be right lol

[Sunir]

Travis sorry fro the loss of your uncle...remain strong in knowing he is in a better place.

I may go to the meet n' eat. Talked about it with Len this morning...

[scottsjeeprolet]

Well Travis is flying out today. i'm taking him to BWI.


HAPPY BIRTHDAY BOOTS!!!!!!!!!!!!!!

Meet n eat weather dependent.