How many RPM's should stock truck take.
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: RALEIGH NC
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
How many RPM's should stock truck take.
Was in a parking lot, turning, don't know what happened it was fast, think the rear end broke loose from the rain or cluch slip.
Hit the gas to go and the RPM's went in the 3500 range maybe little more...
Truck sounds fine, no rear hop, like it has if you break loose, so I don't know.....
I was thinking that they defuel or limit the RPM's in the stock trucks.
Think it did anything? What to look for? Long term if it sounds fine now?
Thanks.....
Hit the gas to go and the RPM's went in the 3500 range maybe little more...
Truck sounds fine, no rear hop, like it has if you break loose, so I don't know.....
I was thinking that they defuel or limit the RPM's in the stock trucks.
Think it did anything? What to look for? Long term if it sounds fine now?
Thanks.....
#6
Registered User
Thread Starter
Join Date: Jan 2003
Location: RALEIGH NC
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Good deal guys Thanks....
Not that I will do it again but it sounded like a real motor.......
It was tough....
People in the parking lot at work were asking me what I got for a motor in that thing... And what I did to it.....
I hit the go stick.... A little hard.
Not that I will do it again but it sounded like a real motor.......
It was tough....
People in the parking lot at work were asking me what I got for a motor in that thing... And what I did to it.....
I hit the go stick.... A little hard.
Trending Topics
#8
Registered User
i wonder what size valve springs they have in them if they can turn up to 3500RPM? aren't the valves floating around 3800RPM? i'm a 1st gen guy, so that's why i'm curious. when 1st gens get a 3200 governor spring, 60lbs valve springs are a good idea.
#9
At 3500 rpms and/or 50 lbs of boost the valves and piston are starting to have a meeting, not a good one either. Been more than a few engines pulled down to find little eye brows in the pistons.
Thread
Thread Starter
Forum
Replies
Last Post
Common
12 Valve Engine and Drivetrain
18
07-10-2006 12:01 AM
fishin fever
Towing and Hauling / RV
7
02-22-2004 08:32 PM