How LITTLE lift for crossover steering?
01-03-2007, 08:33 AM
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: Brunswick, ME
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
How LITTLE lift for crossover steering?
I am about to lift the 93 Ive got, and Im thinkin just some 2.5 Skyjackers and good Bilstien shocks all around with some minor trimming for some 35/12.5/17 Mickey Thompson MTZ radials. I despise the steering systen these trucks have, can I do crossover with only 2.5 of lift, or do I have to go to 4 inches??
(just easier not ot have to touch the back right now, and Im not stackin lift blocks as the stock ones are 6" tall already!)
Thanks
(just easier not ot have to touch the back right now, and Im not stackin lift blocks as the stock ones are 6" tall already!)
Thanks
01-03-2007, 08:54 AM
#2
Registered User
Thread Starter
Join Date: Mar 2006
Location: Brunswick, ME
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
You know, an idea strikes me. I order my fancy smancy high steer arm from Mad4wd, and its not reamed for the draglink/tie rod end. Is there room enough for me to ream it from the bottom up?? This may work, but in my mind I see serious drag link end to spring contact..........
Thread
Thread Starter
Forum
Replies
Last Post
BILTIT
1st Gen. Ram - All Topics
313
02-11-2014 07:54 AM
93-12Smoke
1st Gen. Ram - All Topics
14
01-24-2012 12:43 PM